Vitek VT-8137 [6/28] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-8137 [6/28] English

Vitek VT-8137 [6/28] English
6
ENGLISH
• Remove the outlet filter grid (25) turning it
counterclockwise “OPEN” and remove the
HEPA filter (26) (pic. 7).
• Wash the HEPA filter (26) under slightly warm
water jet. Do not wash the filter in a dishwash-
ing machine.
• Dry the HEPA filter (26). Do not dry the HEPA
filter (26) with a hairdryer.
• Install the HEPA filter (26) back to its place.
• Install the outlet filter grid (25) back to its
place, to do this match the mark “OPEN” on
the grid (25) with the mark on the vacuum
cleaner body, turn the grid (25) clockwise until
bumping “LOCK”.
Notes:
– Before installing the HEPA filter (26) make
sure that it is dry.
– Do not dry the HEPA filter (26) with a hairdryer.
Vacuum cleaner body
– Clean the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug
into water or any other liquids. Provide that no
liquid gets inside the vacuum cleaner body.
– Do not use solvents or abrasives to clean the
surface of the vacuum cleaner.
OVERHEATING PROTECTION
The overheating protection system will switch the
power supply off if the electric motor operating
temperature is too high. If during the operation
the vacuum cleaner has switched off, press the
on/off button (24), unplug the unit.
Let the vacuum cleaner cool down for 30-40 min-
utes and switch it on again.
STORAGE
• Before taking the vacuum cleaner away for
long term storage, clean the vacuum cleaner
body, the dust bin (11), the filter block (16),
the separator (19) and the outlet HEPA fil-
ter (26).
• For easy storing use the horizontal brush stor-
age (23) (pic. 3).
• Keep the vacuum cleaner in a dry cool place
out of reach of children and disabled persons.
DELIVERY SET
Vacuum cleaner with the dust bin
and filters installed – 1 pc.
Flexible hose – 1 pc.
Telescopic extension pipe – 1 pc.
Floor/carpet brush – 1 pc.
Combined crevice nozzle – 1 pc.
Furniture brush – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 1400 W
Maximum power: 2000 W
Suction power: 350 W
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not dis-
card the unit and the batteries with usual house-
hold waste after the service life expiration; apply
to specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without
a preliminary notification due to which insignifi-
cant differences between the manual and product
may be observed. If the user reveals such differ-
ences, please report them via e-mail info@vitek.ru
for receipt of an updated manual.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-8137.indd 6 31.01.2019 16:49:37

Содержание

Похожие устройства

Скачать