Satelec Acteon Group X-Mind DC 80 [12/65] Installation specifications

WARNING

Prior to installing the X-ray system the Office Owner must ascertain that:

the environment, the electrical system and the power supply comply with the

requirements specified, otherwise he must provide the required adjustment works.

1. ENVIRONMENT REQUIREMENTS

a. The installation environment must be of appropriate width.

Using the sizes and overall dimensions provided (refer to §3 “OVERALL DIMENSIONS”),

ensure that no obstacles are present while positioning the X-ray system

b. The environment must not be subject to explosion risks and must not be pressurized

c. While operating, the ambient temperature must range within +5°C and +40°C

d. The storage temperature must range within -15°C and +50°C

e. The relative humidity must range within 25 % and 75 %

2. SUPPORTING WALL REQUIREMENTS

a. The X-ray system supporting wall must be able to stand 200 kg tear at every point

PLEASE NOTE

The nature and consistency of the wall must be checked and if required, seek the

support of a brickwork expert. Walls of uncertain consistency must be reinforced with

a buried counter plate or with a sandwich type system.

3. ELECTRICAL SYSTEM REQUIREMENTS

a. The electrical system must comply with regulations in force

b. The electrical system must be able to supply the power and voltage required in the

Manufacturer's rating plate of the X-ray system as shown in Chart 1

CHART 1

MANUFACTURER’S RATING PLATE

230 V ± 15%

115 V ± 15%

RATED LINE VOLTAGE

230 V 115 V

MINIMUM VOLTAGE

196 V 98 V

MAXIMUM LINE VOLTAGE

264 V 132 V

FREQUENCY

50/60 Hz 50/60 Hz

ELECTRICAL

SYSTEM

POWER ABSORBED DURING EXPOSURE

850 W 850 W

4. INSTALLATION SPECIFICATIONS