Tp-Link CPE610 V1 [6/80] Software configurations

Tp-Link CPE610 V1 [6/80] Software configurations
English
4
Mount the mounting bracket to the
preferred position in the wall� Push and
slide the device to lock it into place� Then
connect the antennas to the device
Mounting the Device on an Antenna (for WBS)
Mount the device on the antenna with
mounting bracket� Connect the RF cables
from the device to the corresponding
connectors on the antenna� Attach the
protective cap
Software Configurations
Managed Mode
To configure mass devices via a centralized management software or a wireless
controller, please refer to the corresponding User Guide� You can download the
User Guide from our website http://www.tp-link.com
Standalone Mode
To congure a device through a web-based management system, please follow the
steps below
1. Launch a web browser and enter the IP address of your device in the address
bar and press Enter
Note:
For EAP, you can check the IP address through your router.
For other products, the default IP address is 192.168.0.254 and the IP address of your
computer should be set as 192.168.0.x (“x” is any number from 1 to 253).
2. Enter admin for both User Name and Password for login�
3. Change the default User Name and Password to protect your device, then start
conguring the device.

Содержание