Tp-Link TL-WPA4220KIT V3 Руководство по быстрому старту онлайн
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tp-Link TL-WPA4220KIT V3 Руководство по быстрому старту онлайн

Tp-Link TL-WPA4220KIT V3 Руководство по быстрому старту онлайн
Extender B
TL-WPA4220
Extender A
TL-WPA4220
2
Plug in the adapter and extenders in
the same room. Wait until the
extenders’ Wi-Fi LEDs turn on.
Note: If only one wall outlet is available, plug all
devices into a power strip for setup, then relocate
to wall outlets before enjoying the internet.
Pair Adapter and Extender B by referring to step 3. Extender B will automatically sync Wi-Fi settings
from Extender A.
4
5
Note: If the Powerline LED on any extender turns red, it means the signal strength is poor. Try another wall outlet.
Relocate the extenders to the Wi-Fi “dead zone” on the same electrical circuit. Connect your
devices to the internet using the default SSID (network name) and password on the Wi-Fi Info Card
provided for Extender A.
Tips:
Want to unify Wi-Fi networks or
personalize your network?
See the back page for instructions.
Attention
Wall Outlet Power Strip
Plug powerline devices into wall outlets. Do not use power strips after setup.
Pair Adapter and Extender A (the rst extender you want to pair).3
Note: If the LED does not blink, press the
button again.
Press the adapter‘s Pair button for 1 second.
The Power LED starts blinking.
A
Within 2 minutes, press the extender’s Pair button for 1 second.
The Power LED starts blinking.
B
When the Powerline LED turns on, the pairing process is
complete.
Extender TL-WPA4220
Within 2 minutes
Adapter TL-PA4010
600Mbps
Blinking
Blinking
On
Quick Installation Guide
TL-WPA4220 TKIT
Ethernet Cable
Adapter
TL-PA4010
Powerline
Router
1
LAN
600Mbps
On
On

Содержание

Похожие устройства

Скачать