Главная
Skipped breadcrumb items
DS 18DBL2
Инструкция по эксплуатации Страница: 10

Главная
Hikoki
DS 18DBL2
Инструкция по эксплуатации Страница: 10

Hikoki DS 18DBL2 — решение проблем с электроинструментами: советы и рекомендации [10/280]

Превью страниц Страница 10 / 280

Hikoki DS 18DBL2 [10/280] Troubleshooting

English

NOTE

Due to HiKOKI’s continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

TROUBLESHOOTING

Use the inspections in the table below if the tool does not operate normally. If this does not remedy the problem, consult your

dealer or the HiKOKI Authorized Service Center.

Symptom Possible cause Remedy

Tool doesn’t run No remaining battery power Charge the battery.

Battery isn’t securely attached. Push in the battery until a click is heard.

Tool suddenly stopped Tool was overburdened Remove the cause of the overburdening.

See “Reactive force control”.

Reactive force control was activated

Battery or tool overheated Allow the tool and battery to thoroughly cool.

Tool bits

-can’t be attached

-fall oﬀ

The shape of the attachment portion doesn’t

match

The chucking diameter of the keyless chuck

is 1.5 mm to 13 mm. Use a bit that falls

within the stated range.

The lock of the keyless chuck is worn Contact a HiKOKI Authorized Service

Center and arrange to have the old keyless

chuck replaced with a new one.

Switch can’t be pulled Forward/reverse selector button is

positioned halfway

Press the button ﬁ rmly into position for the

desired direction of rotation.

Screw head slips or comes

loose.

Bit number doesn’t match with the screw

size

Install a suitable bit.

The bit is worn Replace with a new bit.

Holes can’t be smoothly

drilled.

The drill is worn Replace with a new drill.

Rotation speed isn’t appropriate Adjust the rotation speed (HIGH/LOW) to

match the material to be drilled.

The drill is rotating in reverse Switch to forward rotation.

The charge indicator lamp

is rapidly blinking purple,

and battery charging

doesn’t begin.

The battery is not inserted all the way. Insert the battery ﬁ rmly.

There is foreign matter in the battery

terminal or where the battery is attached.

Remove the foreign matter.

The charge indicator lamp

blinks red, and battery

charging doesn’t begin.

The battery is not inserted all the way. Insert the battery ﬁ rmly.

The battery is overheated. If left alone, the battery will automatically

begin charging if its temperature decreases,

but this may reduce battery life. It is

recommended that the battery be cooled in

a well-ventilated location away from direct

sunlight before charging it.

Battery usage time is short

even though the battery is

fully charged.

The battery’s life is depleted. Replace the battery with a new one.

The battery takes a long

time to charge.

The temperature of the battery, the charger,

or the surrounding environment is extremely

low.

Charge the battery indoors or in another

warmer environment.

The charger’s vents are blocked, causing its

internal components to overheat.

Avoid blocking the vents.

The cooling fan is not running. Contact a HiKOKI Authorized Service

Center for repairs.

The USB power lamp

has switched oﬀ and the

USB device has stopped

charging.

The battery’s capacity has become low. Replace the battery with one that has

capacity remaining.

Plug the charger’s power plug into an

electric socket.

USB power lamp does not

switch oﬀ even though the

USB device has ﬁ nished

charging.

The USB power lamp lights up green to

indicate that USB charging is possible.

This is not a malfunction.

0000BookDS14DBL2.indb100000BookDS14DBL2.indb10 2018/07/2015:56:092018/07/2015:56:09

Hikoki DS 18DBL2 — решение проблем с электроинструментами: советы и рекомендации [10/280]

Содержание

Похожие устройства