![Hikoki G 13SR4 [3/144] English](/img/pdf.png)
Hikoki G 13SR4 [3/144] English
![Hikoki G 13SR4 [3/144] English](/views2/1471492/page3/bg3.png)
3
English
SAFETY WARNINGS COMMON FOR
GRINDING OR ABRASIVE CUTTING-
OFF OPERATIONS
a) This power tool is intended to function as a
grinder or cut-off tool. Read all safety warnings,
instructions, illustrations and specifi cations
provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
b) Operations such as sanding, wire brushing or
polishing are not recommended to be performed
with this power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
c)
Do not use accessories which are not specifi cally
designed and recommended by the tool manufacturer.
Just because the accessory can be attached to your
power tool, it does not assure safe operation.
d)
The rated speed of the accessory must be at least equal
to the maximum speed marked on the power tool.
Accessories running faster than their rated speed can
break and fl y apart.
e) The outside diameter and the thickness of your
accessory must be within the capacity rating of
your power tool.
Incorrectly sized accessories cannot be adequately
guarded or controlled.
f) Threaded mounting of accessories must match the
grinder spindle thread. For accessories mounted
by fl anges, the arbour hole of the accessory must
fi t the locating diameter of the fl ange.
Accessories that do not match the mounting hardware of
the power tool will run out of balance, vibrate excessively
and may cause loss of control.
g) Do not use a damaged accessory. Before each use
inspect the accessory such as abrasive wheels for
chips and cracks, backing pad for cracks, tear or
excess wear, wire brush for loose or cracked wires.
If power tool or accessory is dropped, inspect for
damage or install an undamaged accessory. After
inspecting and installing an accessory, position
yourself and bystanders away from the plane of
the rotating accessory and run the power tool at
maximum no-load speed for one minute.
Damaged accessories will normally break apart during
this test time.
h)
Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety
glasses. As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments.
The eye protection must be capable of stopping fl ying
debris generated by various operations. The dust mask
or respirator must be capable of fi ltrating particles
generated by your operation. Prolonged exposure to
high intensity noise may cause hearing loss.
i) Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment.
Fragments of workpiece or of a broken accessory may
fl y away and cause injury beyond immediate area of
operation.
j)
Hold the power tool by insulated gripping surfaces
only, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord.
Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
k) Position the cord clear of the spinning accessory.
If you lose control, the cord may be cut or snagged and your
hand or arm may be pulled into the spinning accessory.
l) Never lay the power tool down until the accessory
has come to a complete stop.
The spinning accessory may grab the surface and pull
the power tool out of your control.
m)
Do not run the power tool while carrying it at your side.
Accidental contact with the spinning accessory could
snag your clothing, pulling the accessory into your body.
n) Regularly clean the power tool’s air vents.
The motor’s fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause
electrical hazards.
o)
Do not operate the power tool near fl ammable materials.
Sparks could ignite these materials.
p) Do not use accessories that require liquid coolants.
Using water or other liquid coolants may result in
electrocution or shock.
KICKBACK AND RELATED
WARNINGS
Kickback is a sudden reaction to a pinched or snagged
rotating wheel, backing pad, brush or any other accessory.
Pinching or snagging causes rapid stalling of the rotating
accessory which in turn causes the uncontrolled power tool
to be forced in the direction opposite of the accessory’s
rotation at the point of the binding.
For example, if an abrasive wheel is snagged or pinched by
the workpiece, the edge of the wheel that is entering into the
pinch point can dig into the surface of the material causing
the wheel to climb out or kick out. The wheel may either jump
toward or away from the operator, depending on direction of
the wheel’s movement at the point of pinching.
Abrasive wheels may also break under these conditions.
Kickback is the result of power tool misuse and/or incorrect
operating procedures or conditions and can be avoided by
taking proper precautions as given below.
a)
Maintain a fi rm grip on the power tool and position your
body and arm to allow you to resist kickback forces.
Always use auxiliary handle, if provided, for maximum
control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback
forces, if proper precautions are taken.
b) Never place your hand near the rotating accessory.
Accessory may kickback over your hand.
c) Do not position your body in the area where power
tool will move if kickback occurs.
Kickback will propel the tool in direction opposite to the
wheel’s movement at the point of snagging.
d) Use special care when working corners, sharp edges
etc. Avoid bouncing and snagging the accessory.
Corners, sharp edges or bouncing have a tendency to
snag the rotating accessory and cause loss of control or
kickback.
e) Do not attach a saw chain woodcarving blade or
toothed saw blade.
Such blades create frequent kickback and loss of control.
SAFETY WARNINGS SPECIFIC FOR
GRINDING AND ABRASIVE CUTTING-
OFF OPERATIONS
a) Use only wheel types that are recommended for
your power tool and the specifi c guard designed
for the selected wheel.
Wheels for which the power tool was not designed
cannot be adequately guarded and are unsafe.
b) The grinding surface of centre depressed wheels
must be mounted below the plane of the guard lip.
An improperly mounted wheel that projects through the
plane of the guard lip cannot be adequately protected.
0000Book_G10SR4.indb 30000Book_G10SR4.indb 3 2017/12/19 17:26:012017/12/19 17:26:01
Содержание
- G 10sr 1
- G 12sr 1
- G 13sr4 1
- Handling instructions bedienungsanleitung mode d emploi istruzioni per l uso gebruiksaanwijzing instrucciones de manejo instruções de uso bruksanvisning brugsanvisning bruksanvisning käyttöohjeet οδηγίες χειρισμού instrukcja obsługi 1
- Kezelési utasítás návod k obsluze kullanım talimatları instrucţiuni de utilizare navodila za rokovanje pokyny na manipuláciu инструкция за експлоатация uputstvo za rukovanje upute za rukovanje iнструкції щодо поводження з пристроєм инструкция по эксплуатации 1
- English 2
- General power tool safety warnings 2
- English 3
- Kickback and related warnings 3
- Safety warnings common for grinding or abrasive cutting off operations 3
- Safety warnings specific for grinding and abrasive cutting off operations 3
- Additional safety warnings 4
- Additional safety warnings specific for abrasive cutting off operations 4
- English 4
- General safety instructions for grinders 4
- Applications 5
- English 5
- Maintenance and inspection 5
- Mounting and operation 5
- Specifications 5
- Standard accessories 5
- Symbols 5
- English 6
- Allgemeine sicherheitshinweise für elektrogeräte 7
- Deutsch 7
- Deutsch 8
- Für schleif und trennschleifarbeiten geltende sicherheitshinweise 8
- Besondere sicherheitshinweise für schleif bzw trennschleifarbeiten 9
- Deutsch 9
- Rückschlag und dazu gehörige sicherheitshinweise 9
- Weitere sicherheitshinweise zu trennschleifarbeiten 9
- Allgemeine sicherheitshinweise für schleifgeräte 10
- Deutsch 10
- Zusätzliche sicherheitswarnungen 10
- Anwendungsgebiete 11
- Deutsch 11
- Montage und betrieb 11
- Standardzubehör 11
- Symbole 11
- Technische daten 11
- Wartung und inspektion 11
- Deutsch 12
- Avertissements de sécurité généraux pour l outil 13
- Français 13
- Avertissements de sécurité courants pour les opérations de meulage ou de découpage par abrasion 14
- Français 14
- Avertissements de sécurité propres aux opérations de découpage par abrasion 15
- Avertissements de sécurité propres aux opérations de meulage et de découpage par abrasion 15
- Français 15
- Recul et avertissements connexes 15
- Avertissements de sécurité supplémentaires 16
- Consignes de sécurité générales pour les meuleuses 16
- Français 16
- Symboles 16
- Accessoires standard 17
- Applications 17
- Caractéristiques 17
- Entretien et vérification 17
- Français 17
- Installation et fonctionnement 17
- Français 18
- Avvertimenti generali di sicurezza sugli utensili elettrici 19
- Italiano 19
- Avvertimenti di sicurezza comuni per le operazioni di smerigliatura o di taglio abrasivo 20
- E il diametro esterno e lo spessore del vostro accessorio devono rientrare entro la capacità nominale dell utensile elettrico 20
- Italiano 20
- Avvertimenti di sicurezza aggiuntivi specifici per le operazioni di taglio abrasivo 21
- Avvertimenti di sicurezza specifici per le operazioni di smerigliatura e di taglio abrasivo 21
- Istruzioni di sicurezza generali per smerigliatrici 21
- Italiano 21
- Rinculo e relative avvertenze 21
- Italiano 22
- Precauzioni di sicurezza aggiuntive 22
- Simboli 22
- Accessori standard 23
- Applicazioni 23
- Caratteristiche 23
- Italiano 23
- Manutenzione ed ispezione 23
- Montaggio e operazione 23
- Italiano 24
- Algemene veiligheidswaarschuwingen voor elektrisch gereedschap 25
- Nederlands 25
- Nederlands 26
- Veiligheidswaarschuwingen voor slijpen en doorslijpen 26
- Aanvullende specifieke veiligheidswaarschuwingen voor doorslijpen 27
- Nederlands 27
- Specifieke veiligheidswaarschuwingen voor slijpen en doorslijpen 27
- Terugslag en daarmee verband houdende waarschuwingen 27
- Aanvullende veiligheidswaarschuwingen 28
- Algemene veiligheidsinstructies voor slijpmachines 28
- Nederlands 28
- Symbolen 28
- Montage en gebruik 29
- Nederlands 29
- Onderhoud en inspectie 29
- Standaard toebehoren 29
- Technische gegevens 29
- Toepassingen 29
- Nederlands 30
- Advertencias de seguridad general de la herramienta eléctrica 31
- Español 31
- Advertencias comunes de seguridad para las operaciones de molido o corte abrasivo 32
- Español 32
- Advertencias de seguridad adicionales específicas para las operaciones de corte abrasivo 33
- Advertencias de seguridad específicas para las operaciones de molido y corte abrasivo 33
- Español 33
- Retroceso y advertencias relacionadas 33
- Advertencias de seguridad adicionales 34
- Español 34
- Instrucciones de seguridad generales para amoladoras 34
- Símbolos 34
- Accessorios estándar 35
- Aplicación 35
- Español 35
- Especificaciones 35
- Mantenimiento e inspección 35
- Montaje y funcionamiento 35
- Español 36
- Avisos gerais de segurança para a ferramenta elétrica 37
- Português 37
- Avisos de segurança comuns para operações de retificação ou corte abrasivo 38
- Português 38
- Recuo e avisos relacionados 38
- Avisos de segurança adicionais específicos para operações de corte abrasivo 39
- Avisos de segurança específicos para operações de retificação ou corte abrasivo 39
- Instruções de segurança gerais para rebarbadoras 39
- Português 39
- Acessórios padrão 40
- Aplicações 40
- Avisos de segurança adicionais 40
- Especificações 40
- Português 40
- Símbolos 40
- Manutenção e inspeção 41
- Montagem e utilização 41
- Português 41
- Allmänna säkerhetsvarningar för elektriska verktyg 42
- Svenska 42
- Kast och tillhörande varningar 43
- Svenska 43
- Säkerhetsvarningar vanliga för slipnings eller slipande kapningsarbeten 43
- Allmänna säkerhetsinstruktioner för vinkelslipar 44
- Svenska 44
- Säkerhetsvarningar speciella för slipnings och slipande kapningsarbeten 44
- Ytterligare säkerhetsvarningar 44
- Ytterligare säkerhetsvarningar för slipande kapningsarbeten 44
- Användningsområden 45
- Montering och användning 45
- Standardtillbehör 45
- Svenska 45
- Symboler 45
- Tekniska data 45
- Underhåll och inspektion 45
- Svenska 46
- Generelle sikkerhedsadvarsler for elektrisk værktøj 47
- Generelle sikkerhedsadvarsler for slibning eller slibende afskæringsfunktioner 48
- Tilbageslag og relaterede advarsler 48
- Ekstra sikkerhedsforskrifter for slibende afskæringsfunktioner 49
- Generelle sikkerhedsforskrifter for vinkelslibere 49
- Særlige sikkerhedsforskrifter for slibning og slibende afskæringsfunktioner 49
- Anvendelse 50
- Ekstra sikkerhedsadvarsler 50
- Montering og anvendelse 50
- Specifikationer 50
- Standardtilbehør 50
- Symboler 50
- Vedligeholdelse og eftersyn 51
- Generelle sikkerhetsforholdsregler for elektroverktøy 52
- Sikkerhetsinstrukser for vanlig sliping og kutt operasjoner 53
- Tilbakeslag og relaterte advarsler 53
- Ekstra sikkerhetsinstrukser spesifikt for kutt operasjoner 54
- Flere sikkerhetsadvarsler 54
- Generelle sikkerhetsinstruksjoner for slipemaskiner 54
- Sikkerhetsinstrukser spesifikt for sliping og kutt operasjoner 54
- Anvendelse 55
- Montering og bruk 55
- Spesifikasjoner 55
- Standard tilbehør 55
- Symboler 55
- Vedlikehold og inspeksjon 55
- Yleiset sähkötyökalun turvallisuutta koskevat varoitukset 57
- Takapotku ja siihen liittyvät varoitukset 58
- Turvallisuutta koskevia varoituksia hiontaa ja katkaisuhiontaa varten 58
- Lisää turvallisuutta koskevia varoituksia 59
- Lisää turvallisuutta koskevia varoituksia katkaisuhiontaa varten 59
- Turvallisuutta koskevia varoituksia erityisesti hiontaa ja katkaisuhiontaa varten 59
- Yleisiä hiomakoneen käyttöä koskevia turvaohjeita 59
- Huolto ja tarkastus 60
- Kiinnittäminen ja käyttö 60
- Perusvarusteet 60
- Sovellukset 60
- Symbolit 60
- Tekniset tiedot 60
- Γενικεσ προειδοποιησεισ ασφαλειασ του ηλεκτρικου εργαλειου 62
- Ελληνικά 62
- Ελληνικά 63
- Κοινεσ προειδοποιησεισ ασφαλειασ για λειανση η εργασιεσ κοπησ 63
- Ειδικεσ προειδοποιησεισ ασφαλειασ για εργασιεσ λειανσησ η κοπησ 64
- Ελληνικά 64
- Οπισθια κινηση και σχετικεσ προειδοποιησεισ 64
- Προσθετεσ ειδικεσ προειδοποιησεισ ασφαλειασ για εργασίεσ λειανσησ η κοπησ 64
- Γενικεσ οδηγιεσ ασφαλειασ για τροχουσ 65
- Ελληνικά 65
- Προσθετεσ προειδοποιησεισ ασφαλειασ 65
- Βασικα εξαρτηματα 66
- Ελληνικά 66
- Εφαρμογεσ 66
- Στερεωση και λειτουργια 66
- Συμβολα 66
- Συντηρηση και ελεγχοσ 66
- Τεχνικα χαρακτηριστικα 66
- Ελληνικά 67
- Ogólne wskazówki bezpieczeństwa dotyczące elektronarzędzi 68
- Polski 68
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 69
- Polski 69
- Dodatkowe wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 70
- Odbicie i powiązane z nim ostrzeżenia 70
- Ogólne wskazówki bezpieczeństwa dotyczące cięcia 70
- Polski 70
- Dodatkowe wskazówki bezpieczeństwa 71
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania 71
- Polski 71
- Akcesoria standardowe 72
- Konserwacja i kontrola 72
- Montaż i praca 72
- Polski 72
- Specyfikacje techniczne 72
- Symbole 72
- Zastosowania 72
- Polski 73
- A szerszámgéppel kapcsolatos általános biztonsági figyelmeztetések 74
- Magyar 74
- Biztonsági figyelmeztetések csiszoló és vágó műveletekhez 75
- Magyar 75
- Visszarúgás és erre vonatkozó figyelmeztetések 75
- A csiszolási és darabolási műveletekre vonatkozó biztonsági figyelmeztetések 76
- A daraboló műveletekre vonatkozó kiegészítő biztonsági figyelmeztetések 76
- Csiszolókra vonatkozó általános biztonsági utasítások 76
- Magyar 76
- Alkalmazási területek 77
- Magyar 77
- Műszaki adatok 77
- Szabványos kiegészítők 77
- Szimbólumok 77
- További biztonsági figyelmeztetések 77
- Karbantartás és ellenőrzés 78
- Magyar 78
- Összeszerelés és használat 78
- Obecná bezpečnostní varování týkající se bezpečnosti elektrického nánářadí 79
- Čeština 79
- Bezpečnostní varování společné pro broušení a abrazivní řezání 80
- Upozornění na zpětný ráz 80
- Čeština 80
- Bezpečnostní varování pro broušení a řezání 81
- Doplňující bezpečnostní varování pro řezání 81
- Všeobecné bezpečnostní pokyny pro brusky 81
- Čeština 81
- Další bezpečnostní varování 82
- Montáž a provoz 82
- Použití 82
- Specifikace 82
- Standardní příslušenství 82
- Symboly 82
- Čeština 82
- Údržba a kontrola 83
- Čeština 83
- Genel elektri kli alet güvenli k uyarilari 84
- Türkçe 84
- Geri tepme ve i lgi li uyarilar 85
- Taşlama veya aşindirarak kesme i şlemleri i çi n genel güvenli k uyarilari 85
- Türkçe 85
- Aşindirarak kesme i şlemleri i çi n özel i lave güvenli k uyarilari 86
- Kalipçi taşlamalar i çi n genel güvenli k tali matlari 86
- Taşlama ve aşindirarak kesme i şlemleri i çi n özel güvenli k uyarilari 86
- Türkçe 86
- I lave güvenli k uyarilari 87
- Montaj ve çaliştirma 87
- Semboller 87
- Standart aksesuarlar 87
- Tekni k özelli kler 87
- Türkçe 87
- Uygulamalar 87
- Bakim ve muayene 88
- Türkçe 88
- Avertismente generale privind siguranţa sculelor electrice 89
- Română 89
- Avertismente de siguranţă generale pentru operaţiunile de șlefuire sau tăiere abrazivă 90
- Reculul și avertismentele aferente 90
- Română 90
- Avertismente de siguranţă specifice pentru operaţiunile de șlefuire și tăiere abrazivă 91
- Avertismente suplimentare de siguranţă specifice pentru operaţiunile tăiere abrazivă 91
- Instrucţiuni generale de siguranţă pentru polizoare 91
- Română 91
- Accesorii standard 92
- Aplicaţii 92
- Asamblare și operare 92
- Avertismente suplimentare privind siguranţa 92
- Română 92
- Simboluri 92
- Specificaţii 92
- Română 93
- Întreţinere și verificare 93
- Slovenščina 94
- Splošna varnostna navodila za električna orodja 94
- Povratni udarec in ustrezna opozorila 95
- Slovenščina 95
- Varnostna opozorila značilna za brušenje ali rezanje 95
- Dodatna varnostna opozorila 96
- Dodatna varnostna opozorila za rezanje 96
- Slovenščina 96
- Splošna varnostna navodila za brusilnike 96
- Varnostna opozorila za brušenje in rezanje 96
- Namestitev in delovanje 97
- Simboli 97
- Slovenščina 97
- Specifikacije 97
- Standardna pribor 97
- Uporaba 97
- Vzdrževanje in pregledovanje 97
- Slovenščina 98
- Slovenčina 99
- Všeobecné bezpečnostné výstrahy pre elektrické náradie 99
- Bezpečnostné výstrahy spoločné pre činnosti brúsenia a rozbrusovania 100
- Slovenčina 100
- Spätný náraz a príslušné varovania 100
- Bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 101
- Dodatočné bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 101
- Slovenčina 101
- Všeobecné bezpečnostné pokyny pre brúsky 101
- Použitie 102
- Slovenčina 102
- Symboly 102
- Technické parametre 102
- Ďalšie bezpečnostné varovania 102
- Štandardné príslušenstvo 102
- Montáž a obsluha 103
- Slovenčina 103
- Údržba a kontrola 103
- Български 104
- Общи мерки за безопасност при използване на електрически инструменти 104
- Български 105
- Предупреждения за безопасност общи за операции включващи шлифоване или абразивно рязане 105
- Български 106
- Допълнителни предупреждения за безопасност специфични за операции включващи абразивно рязане 106
- Предупреждения за безопасност специфични за операции включващи шлифоване или абразивно рязане 106
- Предупреждения за откат и свързани с това опасности 106
- Български 107
- Допълнителни предупреждения за безопасност 107
- Общи инструкции за безопасност за шлайфмашини 107
- Български 108
- Монтаж и експлоатация 108
- Поддръжка и инспекция 108
- Приложения 108
- Символи 108
- Спецификации 108
- Стандартни аксесоари 108
- Български 109
- Opšta bezbednosna upozorenja za električni alat 110
- Srpski 110
- Bezbednosna upozorenja za postupke brušenja ili abrazivnog sečenja 111
- Povratni udar i slična upozorenja 111
- Srpski 111
- Bezbednosna upozorenja specifična za postupke brušenja i abrazivnog sečenja 112
- Dodatna bezbednosna upozorenja specifična za postupke abrazivnog sečenja 112
- Opšta bezbednosna uputstva za brusilice 112
- Srpski 112
- Dodatna bezbednosna upozorenja 113
- Montaža i upotreba 113
- Oznake 113
- Primene 113
- Specifikacije 113
- Srpski 113
- Standardni pribor 113
- Održavanje i provera 114
- Srpski 114
- Hrvatski 115
- Općenita sigurnosna upozorenja za električne alate 115
- Hrvatski 116
- Povratni udar i povezana upozorenja 116
- Sigurnosna upozorenja za sve operacije brušenja ili abrazivnog rezanja 116
- Dodatna sigurnosna upozorenja 117
- Dodatna sigurnosna upozorenja specifična za operacije abrazivnog rezanja 117
- Hrvatski 117
- Opće sigurnosne upute za brusilice 117
- Sigurnosna upozorenja specifična za operacije brušenja i abrazivnog rezanja 117
- Hrvatski 118
- Montaža i rad 118
- Održavanje i inspekcija 118
- Simboli 118
- Specifikacije 118
- Standardna oprema 118
- Vrste primjene 118
- Hrvatski 119
- Загальні інструкції безпеки електричного інструменту 120
- Українська 120
- Загальні попередження про обережність для проведення шліфувальних робіт або відрізання 121
- Українська 121
- Віддача і пов язані з нею небезпеки 122
- Додаткові заходи безпеки спеціально для абразивного різання 122
- Заходи безпеки під час шліфування і абразивного обрізування 122
- Українська 122
- Додаткові правила безпеки 123
- Загальні інструкції безпеки для шліфувальної машини 123
- Символи 123
- Українська 123
- Області застосування 124
- Стандартні аксесуари 124
- Технічне обслуговування і перевірка 124
- Технічні характеристики 124
- Українська 124
- Установка та експлуатація 124
- Українська 125
- Общие правила безопасности при работе с электроинструментом 126
- Русский 126
- Общие предупреждения об осторожности для проведения шлифовальных работ или отрезания 127
- Русский 127
- Особые меры предосторожности для режущих работ и абразивной отрезки 128
- Отдача и другие похожие предупреждения 128
- Русский 128
- Дополнительные особые меры предосторожности для абразивной отрезки 129
- Общие инструкции по технике безопасности для шлифовальных машин 129
- Русский 129
- Дополнительные указания по обеспечению безопасности 130
- Русский 130
- Символы 130
- Стандартные принадлежности 130
- Назначение 131
- Русский 131
- Технические характеристики 131
- Техническое обслуживание и осмотр 131
- Установка и эксплуатация 131
- Русский 132
- Book_g10sr4 indb 139 0000book_g10sr4 indb 139 2017 12 19 17 26 25 2017 12 19 17 26 25 139
- Certificado de garantia 139
- Certificado de garantía 139
- Certificat de garantie 139
- Certificat de garanţie 139
- Certificato di garanzia 139
- Deutsch norsk slovenščina 139
- English dansk română 139
- Español magyar hrvatski 139
- Français suomi slovenčina 139
- Garancia bizonylat 139
- Garancijsko potrdilo 139
- Garanti serti fi kasi 139
- Garantibevis 139
- Garanticertifikat 139
- Garantiebewijs 139
- Garantieschein 139
- Garantisertifikat 139
- Garantni sertifikat 139
- Guarantee certificate 139
- Gwarancja 139
- Italiano ελληνικά български 139
- Jamstveni certifikat 139
- Nederlands polski srpski 139
- Português čeština український 139
- Svenska türkçe русский 139
- Takuutodistus 139
- Záruční list 139
- Záručný lista 139
- Πιστοποιητικο εγγυησησ 139
- Гарантийный сертификат 139
- Гарантійний сертифікат 139
- Гаранционен сертификат 139
- Hikoki power tools belgium n v s a 141
- Hikoki power tools czech s r o 141
- Hikoki power tools denmark a s 141
- Hikoki power tools deutschland gmbh 141
- Hikoki power tools finland oy 141
- Hikoki power tools france s a s 141
- Hikoki power tools hungary kft 141
- Hikoki power tools italia s p a 141
- Hikoki power tools lbérica s a 141
- Hikoki power tools netherlands b v 141
- Hikoki power tools norway as 141
- Hikoki power tools polska sp z o o 141
- Hikoki power tools romania s r l 141
- Hikoki power tools rus l l c 141
- Hikoki power tools sweden ab 141
- Hikoki power tools u k ltd 141
- Hikoki power tools österreich gmbh 141
- 2018 naoto yamashiro european standard manager 142
- A nakagawa corporate offi cer 142
- Deutsch español 142
- English nederlands 142
- Français português 142
- Head offi ce in japan 142
- Hikoki power tools deutschland gmbh 142
- Italiano svenska 142
- Koki holdings co ltd 142
- Representative offi ce in europe 142
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 142
- Siemensring 34 47877 willich germany 142
- 2018 naoto yamashiro european standard manager 143
- A nakagawa corporate offi cer 143
- Dansk polski 143
- Head offi ce in japan 143
- Hikoki power tools deutschland gmbh 143
- Koki holdings co ltd 143
- Norsk magyar 143
- Representative offi ce in europe 143
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 143
- Siemensring 34 47877 willich germany 143
- Suomi čeština 143
- Ελληνικά türkçe 143
- 2018 naoto yamashiro european standard manager 144
- A nakagawa corporate offi cer 144
- Code no c99714073 na printed in china 144
- Head offi ce in japan 144
- Hikoki power tools deutschland gmbh 144
- Koki holdings co ltd 144
- Representative offi ce in europe 144
- Română srpski 144
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 144
- Siemensring 34 47877 willich germany 144
- Slovenčina український 144
- Slovenščina hrvatski 144
- Български русский 144
Похожие устройства
- Hikoki G 13SE2 Инструкция по эксплуатации
- Pierre Ricaud P97241.1153Q Инструкция по эксплуатации
- Pierre Ricaud P97241.1155Q Инструкция по эксплуатации
- Hikoki G 13SB3 Инструкция по эксплуатации
- Pierre Ricaud P97241.5153Q Инструкция по эксплуатации
- Pierre Ricaud P97241.5155Q Инструкция по эксплуатации
- Hikoki G 15VA Инструкция по эксплуатации
- Pierre Ricaud P97242.2123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5126Q Инструкция по эксплуатации
- Hikoki G 18ST Инструкция по эксплуатации
- Pierre Ricaud P97243.5122Q Инструкция по эксплуатации
- Hikoki G 23UC Инструкция по эксплуатации
- Hikoki G 23SWU Инструкция по эксплуатации
- Hikoki G 23SU Инструкция по эксплуатации
- Hikoki G 23ST Инструкция по эксплуатации
- Hikoki G 23SEY Инструкция по эксплуатации
- Hikoki G 23SCY Инструкция по эксплуатации
- Hikoki G 23MRUA Инструкция по эксплуатации
- Hikoki G 23MR Инструкция по эксплуатации