Rigol DL3021A Инструкция по эксплуатации(ENG) онлайн [49/163] 394808

Chapter 2 Front Panel Operations RIGOL

DL3000 User’s Guide 2-19

3. Set channel parameters in the guide interface

Press Con to enter the Con guide interface, as shown in Figure 2-15. In the

guide interface, you can configure parameters in the parameter configuration

list and view the configuration diagram at the left of the configuration list in the

real-time manner.

Figure 2-15 Guide Interface of Con Operation

The parameters for the continuous operation mode include range, Level A, Level

B, rising slew rate, falling slew rate, frequency/period, width/duty, and trigger

source.

Set Range

Working range for the current in Con mode. Two ranges are available.

DL3021/DL3021A: low range (0 to 4 A); high range (0 to 40 A)

DL3031/DL3031A: low range (0 to 6 A); high range (0 to 60 A)

(1) In the guide interface, press the Up/Down arrow key to switch the

parameter focus to "Range".

(2) Use the Left/Right arrow key or the knob to switch the current working

range.

Note:

 The low range provides better resolution and accuracy at low current

settings.

 If the set current value is greater than the maximum value of the low range,

you must select a high range.

CAUTION

Before switching the current range, please disable the channel input

to avoid causing damage to the instrument or the DUT.

Set A_Level

The sink current toggles between a high value and a low value in Con mode.

A_Level indicates a high value. The default unit for A_Level is Ampere (A).

(1) In the guide interface, press the Up/Down arrow key to switch the

parameter focus to "A_Level".

Parameter

Configuration List

Guide

Diagram