![Gigabyte GA-8I915ME-C [39/80] English](/img/pdf.png)
Gigabyte GA-8I915ME-C [39/80] English
![Gigabyte GA-8I915ME-C [39/80] English](/views2/1047968/page39/bg27.png)
BIOS Setup- 39 -
English
CPU Hyper-Threading
Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled Disables CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP.(Default value)
Init Display First
(Note1)
Select the first initation of the monitor display from different type of VGA card.
PCI Set Init display first to PCI. (Default value)
Onboard Set Init display first to Onboard.
GEAR Set Init display first to GEAR.
PEG2
(Note2)
Set Init display first to PCI Express.
No-Execute Memory Protect
(Note3)
Enabled Enables No-Execute Memory Protect function. (Default value)
Disabled Disables No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
(Note3)
Enabled Enables CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disables CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
(Note3)
Enabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
(Note3)
Enabled Enable CPU EIST function. (Default value)
Disabled Disable EIST function.
On-Chip Frame Buffer Size
1MB Set On-chip frame buffer size to 1MB.
4MB Set On-chip frame buffer size to 4MB.(Default value)
8MB Set On-chip frame buffer size to 8MB.
16MB Set On-chip frame buffer size to 16MB.
32MB Set On-chip frame buffer size to 32MB.
(Note1) BIOS will automatically disable onboard VGA once install AGP or PCI Express graphic card.
If you want Multi-Display supports, please select "Onboard" as default in BIOS, the onboard
VGA will be the primary VGA card while display.
(Note2) GA-8I915ME-GV / GA-8I915ME-GL / GA-8I915ME-C supports transfer up to PCI Express
x4 mode; BIOS item will display “PEG2”.
GA-8I915ME-G supports transfer up to PCI Express x16 mode; BIOS item will display “PEG”.
(Note3) This item will show up when you install a processor which supports this function.
Please refer to the “Graphics Card Support List” for G.E.A.R slot on page 17 ~ page 19.
G.E.A.R supporting transfer up to 33MHz and compatible with AGP 8X slot.
Содержание
- Ga 8i915me series 1
- Lga775 processor motherboard 1
- Pentiu 1
- Rev 1003 12me i915mes 1003 1
- User s manual 1
- Copyright 3
- Notice 3
- Product manual classification 3
- Block diagram 7 4
- Chapter 1 hardware installation 9 4
- Chapter 2 bios setup 33 4
- Ga 8i915me series motherboard layout 6 4
- Table of content 4
- Chapter 3 install drivers 51 5
- Chapter 4 appendix 55 5
- Ga 8i915me 6
- Ga 8i915me series motherboard layout 6
- Only for ga 8i915me gv only for ga 8i915me gl only for ga 8i915me c only for ga 8i915me g 6
- Block diagram 7
- 1 considerations prior to installation 9
- Chapter 1 hardware installation 9
- English 9
- Installation notices 9
- Instances of non warranty 9
- Preparing your computer 9
- 2 feature summary 10
- English 10
- English 11
- 3 1 installation of the cpu 12
- 3 installation of the cpu and heatsink 12
- English 12
- 3 2 installation of the heatsink 13
- English 13
- 4 installation of memory 14
- English 14
- Dual channel ddr 15
- English 15
- 5 installation of expansion cards 16
- English 16
- 5 1 what is g e a r 17
- 5 2 graphics card support list 17
- English 17
- English 18
- English 19
- 6 i o back panel introduction 20
- Com 1 serial port 20
- English 20
- Lan port 20
- Line in 20
- Line out 20
- Mic in 20
- Parallel port 20
- Ps 2 keyboard and ps 2 mouse connector 20
- Usb port 20
- Vga port 20
- 7 connectors introduction 21
- English 21
- 2 atx_12v atx power connector 22
- English 22
- Ga 8i915me series motherboard 22 22
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector please make sure that all components and devices are properly installed align the power connector with its proper location on the motherboard and connect tightly the atx_12v power connector mainly supplies power to the cpu if the atx_12v power connector is not connected the system will not start caution please use a power supply that is able to handle the system voltage requirements it is recommended that a power supply that can withstand high power consumption be used 300w or greater if a power supply is used that does not provide the required power the result can lead to an unstable system or a system that is unable to start if you use a 24 pin atx power supply please remove the small cover on the power connector on the motherboard before plugging in the power cord otherwise please do not remove it 22
- 4 cpu_fan sys_fan cooler fan power connector 23
- English 23
- Fdd floppy connector 23
- An ide device connects to the computer via an ide connector one ide connector can connect to one ide cable and the single ide cable can then connect to two ide devices hard drive or optical drive if you wish to connect two ide devices please set the jumper on one ide device as master and the other as slave for information on settings please refer to the instructions located on the ide device 24
- English 24
- Ga 8i915me series motherboard 24 24
- Ide ide connector 24
- Sata0 sata2 serial ata connector controlled by ich6 24
- Serial ata can provide up to 150mb s transfer rate please refer to the bios setting for the serial ata and install the proper driver in order to work properly 24
- English 25
- F_panel front panel jumper 25
- Hardware installation 25 25
- Please connect the power led pc speaker reset switch and power switch etc of your chassis frontpanel to the f_panel connector according to the pin assignment below 25
- Wol wake on lan 25
- English 26
- F_audio front audio connector 26
- Ga 8i915me series motherboard 26 26
- Please make sure the pin assignments on the cable are the same as the pin assignments of the f_audio connector on the motherboard to find out if the chassis you are buying support front audio panel connector please contact your dealer if you want to use front audio connector you must remove the jumpers on pin 5 6 9 10 26
- Pwr_led 26
- Pwr_led is connect with the system power indicator to indicate whether the system is on off it will blink when the system enters suspend mode 26
- Aux_in aux in connector 27
- Cd_in cd in 27
- Connect cd rom or dvd rom audio out to the connector 27
- Connect other device such as pci tv tuner audio out to the connector 27
- English 27
- Hardware installation 27 27
- Be careful with the polarity of the com connector check the pin assignment carefully while you connect the com cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional com cable please contact your local dealer 28
- Be careful with the polarity of the front usb connector check the pin assignment carefully while you connect the front usb cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional front usb cable please contact your local dealer 28
- Com2 serial port connector 28
- English 28
- F_ usb1 f_usb2 front usb connector 28
- Ga 8i915me series motherboard 28 28
- English 29
- Hardware installation 29 29
- Please contact your nearest dealer for optional sur_cen cable 29
- Spdif_io spdif in out 29
- Sur_cen 29
- The spdif output is capable of providing digital audio to external speakers or compressed ac3 data to an external dolby digital decoder use this feature only when your stereo system has digital input function use spdif in feature only when your device has digital output function be careful with the polarity of the spdif_io connector check the pin assignment carefully while you connect the spdif_io cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional spdif_io cable please contact your local dealer 29
- Ci chassis intrusion case open 30
- Clr_cmos clear cmos 30
- English 30
- Ga 8i915me series motherboard 30 30
- This 2 pin connector allows your system to detect if the chassis cover is removed you can check the case opened status in bios setup 30
- You may clear the cmos data to its default values by this jumper to clear cmos temporarily short 1 2 pin default doesn t include the shunter to prevent from improper use this jumper 30
- Bat battery 31
- Bios_wp bios write protect 31
- English 31
- Hardware installation 31 31
- English 32
- Chapter 2 bios setup 33
- Control keys 33
- English 33
- Main menu 33
- Status page setup menu option page setup menu 33
- Advanced bios features 34
- English 34
- Fail safe defaults indicates the value of the system parameters which the system would be in safe configuration 34
- Frequency voltage control 34
- Ga 8i915me series motherboard 34 34
- If you can t find the setting you want please press ctrl f1 to search the advanced option hidden please load optimized defaults in the bios when somehow the system works not stable as usual this action makes the system reset to the default for stability 34
- Integrated peripherals 34
- Load fail safe defaults 34
- Pc health status 34
- Pnp pci configuration 34
- Power management setup 34
- Standard cmos features 34
- The bios setup menus described in this chapter are for reference only and may differ from the exact settings for your motherboard 34
- The main menu for example ga 8i915me gv bios ver f2 34
- This setup page includes all onboard peripherals 34
- This setup page includes all the configurations of pci pnp isa resources 34
- This setup page includes all the items in standard compatible bios 34
- This setup page includes all the items of award special enhanced features 34
- This setup page includes all the items of green function features 34
- This setup page is control cpu clock and frequency ratio 34
- This setup page is the system auto detect temperature voltage fan speed 34
- To accept or enter the sub menu 34
- English 35
- 1 standard cmos features 36
- Access mode use this to set the access mode for the hard drive the four options are chs lba large auto default auto hard drive information should be labeled on the outside drive casing enter the appropriate option based on this information 36
- Cylinder number of cylinders 36
- Day the day from 1 to 31 or the maximum allowed in the month 36
- English 36
- Ga 8i915me series motherboard 36 36
- Head number of heads 36
- Ide channel 0 2 master slave 36
- Ide hdd auto detection press enter to select this option for automatic device detection ide channel 0 2 master slave ide device setup you can use one of three methods auto allows bios to automatically detect ide devices during post default none select this if no ide devices are used and the system will skip the automatic detection step and allow for faster system start up manual user can manually input the correct settings 36
- Month the month jan through dec 36
- Precomp write precomp 36
- The time is calculated base on the 24 hour military time clock for example 1 p m is 13 00 00 36
- Week the week from sun to sat determined by the bios and is display only 36
- Year the year from 1999 through 2098 36
- Base memory 37
- Drive a drive b 37
- English 37
- Extended memory 37
- Floppy 3 mode support for japan area 37
- Halt on 37
- Memory 37
- 2 advanced bios features 38
- Cdrom select your boot device priority by cdrom 38
- Disabled disabled this function 38
- English 38
- First second third boot device 38
- Floppy select your boot device priority by floppy 38
- Ga 8i915me series motherboard 38 38
- Hard disk boot priority 38
- Hard disk select your boot device priority by hard disk 38
- Lan select your boot device priority by lan 38
- Ls120 select your boot device priority by ls120 38
- Note3 this item will show up when you install a processor which supports this function 38
- Password check 38
- Pentiu 38
- Processor with ht technology 38
- Select boot sequence for onboard or add on cards scsi raid etc 38
- Setup the system will boot but will not access to setup page if the correct password is not entered at the prompt default value 38
- System the system will not boot and will not access to setup page if the correct password is not entered at the prompt 38
- System will detect automatically and show up when you install the inte 38
- To exit this menu 38
- Usb cdrom select your boot device priority by usb cdrom 38
- Usb fdd select your boot device priority by usb fdd 38
- Usb hdd select your boot device priority by usb hdd 38
- Usb zip select your boot device priority by usb zip 38
- Zip select your boot device priority by zip 38
- Cpu eist functio 39
- Cpu enhanced halt c1e 39
- Cpu hyper threading 39
- Cpu thermal monitor 2 tm2 39
- English 39
- Init display first 39
- Limit cpuid max to 3 39
- No execute memory protec 39
- On chip frame buffer size 39
- 3 integrated peripherals 40
- Auto bios will auto detect combined set on chip sata mode to combined you can use up to 4 hdds on the motherboard 2 for sata and the other for pata ide 40
- Ch master slave set pata ide to ch 0 master slave 40
- Ch master slave set pata ide to ch 1 master slave default value 40
- Disable this function if you are not using onboard usb 2 feature 40
- Disabled disable onboard 1st channel ide port 40
- Disabled disable this function 40
- Disabled disable usb 2 controller 40
- Disabled disable usb controller 40
- Enabled enable onboard 1st channel ide port default value 40
- Enabled enable usb 2 controller default value 40
- Enabled enable usb controller default value 40
- English 40
- Enhanced set on chip sata mode to enhanced the motherboard allows up to 6 hdds to use default value 40
- Ga 8i915me series motherboard 40 40
- Non combined set on chip sata mode to non combined sata will be simulated to pata mode 40
- On chip primary pci ide 40
- On chip sata mode 40
- Pata ide set to 40
- Sata port 0 2 set to 40
- This value will auto make by the setting on chip sata mode and pata ide set to if pata ide were set to ch 1 master slave this function will auto set to ch 0 master slave 40
- Usb 2 controller 40
- Usb controller 40
- Ac97 audio 41
- Ecp mode use dma 41
- English 41
- Onboard h w lan 41
- Onboard lan boot rom 41
- Onboard parallel port 41
- Onboard serial port 1 41
- Onboard serial port 2 41
- Parallel port mode 41
- Usb keyboard support 41
- Usb mouse support 41
- 4 power management setup 42
- Acpi suspend type 42
- Date of month alarm everyday 1 31 42
- Delay 4 sec press power button 4 sec to power off enter suspend if button is pressed less than 4 sec 42
- Disabled disable modemringon wakeonlan function 42
- Disabled disable this function 42
- Disabled disable this function default value 42
- Double click double click on ps 2 mouse left button to power on the system 42
- Enabled enable alarm function to power on system if rtc alarm lead to power on is enabled 42
- Enabled enable modemringon wakeonlan function default value 42
- Enabled enable pme event wake up default value 42
- English 42
- Ga 8i915me series motherboard 42 42
- Instant off press power button then power off instantly default value 42
- Modemringon wakeonlan 42
- Pme event wake up 42
- Power on by mouse 42
- Resume by alarm 42
- S1 pos set acpi suspend type to s1 pos power on suspend default value 42
- S3 str set acpi suspend type to s3 str suspend to ram 42
- Soft off by pwr bttn 42
- Time hh mm ss alarm 0 23 0 59 0 59 42
- You can set resume by alarm item to enabled and key in data time to power on system 42
- Ac back function 43
- English 43
- Kb power on password 43
- Power on by keyboard 43
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci 1 44
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci 2 44
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci 3 44
- 5 pnp pci configurations 44
- 6 pc health status 44
- Auto auto assign irq to pci 1 default value 44
- Auto auto assign irq to pci 2 default value 44
- English 44
- Ga 8i915me series motherboard 44 44
- Pci 1 irq assignment 44
- Pci 2 irq assignment 44
- Pci 3 irq assignment 44
- Case opened 45
- Cpu smart fan control 45
- Cpu smart fan mode 45
- Cpu sysem fan fail warning 45
- Cpu warning temperature 45
- Current cpu system fan speed rpm 45
- Current cpu temperature 45
- Current voltage v vcore ddr25v 3 v 12v 45
- English 45
- Reset case open status 45
- 7 frequency voltage control 46
- Cpu clock ratio 46
- English 46
- Memory frequency for 46
- Memory frequency mhz 46
- 8 load fail safe defaults 47
- 9 load optimized defaults 47
- Bios setup 47 47
- English 47
- Fail safe defaults contain the most appropriate values of the system parameters that allow minimum system performance 47
- Selecting this field loads the factory defaults for bios and chipset features which the system automatically detects 47
- 10 set supervisor user password 48
- English 48
- Ga 8i915me series motherboard 48 48
- When you are prompted to enter password a message password disabled will appear to confirm the password being disabled once the password is disabled the system will boot and you can enter setup freely the bios setup program allows you to specify two separate passwords supervisor password and a user password when disabled anyone may access all bios setup program function when enabled the supervisor password is required for entering the bios setup program and having full configuration fields the user password is required to access only basic items if you select system at password check in advance bios features menu you will be prompted for the password every time the system is rebooted or any time you try to enter setup menu if you select setup at password check in advance bios features menu you will be prompted only when you try to enter setup 48
- 11 save exit setup 49
- 12 exit without saving 49
- Bios setup 49 49
- English 49
- Type y will quit the setup utility and save the user setup value to rtc cmos type n will return to setup utility 49
- Type y will quit the setup utility without saving to rtc cmos type n will return to setup utility 49
- English 50
- 1 install chipset drivers 51
- Chapter 3 install drivers 51
- English 51
- 2 software applications 52
- 3 driver cd information 52
- English 52
- 4 hardware information 53
- 5 contact us 53
- English 53
- English 54
- 1 unique software utilities 55
- C i a cpu intelligent accelerator 2 55
- C o m corporate online management 55
- Chapter 4 appendix 55
- Download center 55
- English 55
- M i b memory intelligent booster 2 55
- M i t motherboard intelligent tweaker 55
- S o s system overclock saver 55
- U plus d p s universal plus dual power system 55
- 1 1 easytune 5 introduction 56
- English 56
- User interface overview 56
- 1 2 xpress recovery2 introduction 57
- Boot from cd dvd 57
- English 57
- How to use the xpress recovery2 57
- System requirements 57
- Xpress recovery2 57
- Backup 58
- English 58
- Limitations 58
- Precautions 58
- Reboot 58
- Remove 58
- Restore 58
- The main screen of xpress recovery2 58
- 1 3 flash bios method introduction 59
- Before you begin 59
- English 59
- Method 1 q flas 59
- Part one updating bios with q flas 59
- Utility 59
- Utility on dual bios motherboards 59
- Action bar 60
- Contains the names of eight tasks and two item showing information about the bios rom type blocking a task and pressing enter key on your keyboard to enable execution of the task 60
- Contains the names of four actions needed to operate the q flash dual bios utility pressing the buttons mentioned on your keyboards to perform these actions 60
- Contains the names of four tasks blocking a task and pressing enter key on your keyboard to enable execu tion of the task 60
- Dual bios 60
- Dual bios utility bar 60
- Dual bios utility screen 60
- English 60
- Entering the q flas 60
- Exploring the q flas 60
- Ga 8i915me series motherboard 60 60
- Q flas 60
- Step 2 press f8 button on your keyboard and then y button to enter the dual bios q flash utility 60
- Step1 to use q flash utility you must press del in the boot screen to enter bios menu 60
- Task menu for 60
- Task menu for dual bios utility 60
- Task menu for q flash utility 60
- The q flash dual bios utility screen consists of the following key components 60
- Utility 60
- Utility title 60
- After bios file is read you ll see a confirmation dialog box asking you are you sure to update bios 61
- After pressing enter you ll then see the progress of reading the bios file from the floppy disk 61
- Appendix 61 61
- Bios file in the floppy 61
- Do not trun off power or 61
- English 61
- If you want to save the current bios for backup purpose you can begin step 1 with save main bios to floppy item 61
- In this example we only download one bios file to the floppy disk so only one bios file 61
- Knxpu fba is listed 61
- Move to the bios file you want to flash and press enter 61
- Please confirm again you have the correct bios file for your motherboard 61
- Press arrow buttons on your keyboard to move the light bar to load main bios from floppy item in the q flash menu and press enter button later you will see a box pop up showing the bios files you previously downloaded to the floppy disk 61
- Reset your system at this 61
- This section tells you how to update bios using the q flash utility as described in the before you begin section above you must prepare a floppy disk having the bios file for your motherboard and insert it to your computer if you have already put the floppy disk into your system and have entered the q flash utility please follow the steps below to flash bios 61
- Using the q flas 61
- Utility 61
- After system reboots you may find the bios version on your boot screen becomes the one you flashed 62
- Becomes fab after 62
- Bios too 62
- English 62
- Ga 8i915me series motherboard 62 62
- Please do not take out the floppy disk when it begins flashing bios 62
- Press any keys to return to the q flash menu when the bios updating procedure is completed 62
- Press esc and then y button to exit the q flash utility the computer will restart automatically after you exit q flash 62
- Press y button on your keyboard after you are sure to update bios then it will begin to update bios the progress of updating bios will be displayed 62
- The bios file 62
- To flash the backup 62
- Updating 62
- You can repeat step 1 to 62
- Appendix 63 63
- English 63
- Part two updating bios with q flas 63
- Press del to enter bios menu after system reboots when you are in bios menu move to load fail safe defaults item and press enter to load bios fail safe defaults normally the system redetects all devices after bios has been upgraded therefore we highly recommend reloading the bios defaults after bios has been upgraded 63
- Press y on your keyboard to load defaults 63
- Press y on your keyboard to save and exit 63
- Select save exit setup item to save the settings to cmos and exit the bios menu system will reboot after you exit the bios menu the procedure is completed 63
- This part guides users of single bios motherboards how to update bios using the q flas 63
- Utility 63
- Utility on single bios motherboards 63
- Action bar 64
- After bios file is read you ll see a confirmation dialog box asking you are you sure to update bios 64
- Bios file in the floppy disk 64
- Contains the names of four actions needed to operate the q flash utility pressing the buttons mentioned on your keyboards to perform these actions 64
- Contains the names of three tasks blocking a task and pressing enter key on your keyboard to enable execution of the task 64
- Do not trun off power or reset your system at 64
- English 64
- Exploring the q flas 64
- Ga 8i915me series motherboard 64 64
- If you want to save the current bios for backup purpose you can begin step 1 with save bios to floppy item 64
- Move to the bios file you want to flash and press enter in this example we only download one bios file to the floppy disk so only one bios file 8ge800 f4 is listed 64
- Please confirm again you have the correct bios file for your motherboard 64
- Please do not take out the floppy disk when it begins flashing bios 64
- Press arrow buttons on your keyboard to move the light bar to update bios from floppy item in the q flash menu and press enter button later you will see a box pop up showing the bios files you previously downloaded to the floppy disk 64
- Q flas 64
- Task menu for 64
- Task menu for q flash utility 64
- The q flashbios utility screen consists of the following key components 64
- This section tells you how to update bios using the q flash utility as described in the before you begin section above you must prepare a floppy disk having the bios file for your motherboard and insert it to your computer if you have already put the floppy disk into your system and have entered the q flash utility please follow the steps below to flash bios 64
- This stage 64
- Using the q flas 64
- Utility 64
- Utility bar 64
- Utility screen 64
- After system reboots you may find the bios version on your boot screen becomes the one you flashed 65
- Appendix 65 65
- Congratulation you have updated bios successfully 65
- Do not trun off power or 65
- English 65
- Press any keys to return to the q flash menu when the bios updating procedure is completed 65
- Press del to enter bios menu after system reboots and load bios fail safe defaults see how to load bios fail safe defaults please kindly refer to step 6 to 7 in part one 65
- Press esc and then y button to exit the q flash utility the computer will restart automatically after you exit q flash 65
- Press y button on your keyboard after you are sure to update bios then it will begin to update bios the progress of updating bios will be shown at the same time 65
- Reset your system at this stage 65
- The bios file becomes f4 after updating 65
- English 66
- Method 2 bio 66
- Methods and steps 66
- Utility 66
- English 67
- 1 4 2 4 6 channel audio function introduction 68
- Channel audio setup 68
- English 68
- Channel analog audio output mode 69
- English 69
- Basic 6 channel analog audio output mode 70
- English 70
- Advanced 6 channel analog audio output mode using audio combo kit optional device 71
- English 71
- Basic advanced 6 channel analog audio output mode notes 72
- English 72
- English 73
- Spdif output device optional device 73
- English 74
- Jack sensing introuction 74
- English 75
- 2 troubleshooting 76
- English 76
- English 77
- English 78
- Appendix 79 79
- Contact us 79
- English 79
- English 80
- Ga 8i915me series motherboard 80 80
Похожие устройства
- Transcend TS16GJF300 Инструкция по эксплуатации
- LG E612 Optimus L5 Black Инструкция по эксплуатации
- Ballu 750 Инструкция по эксплуатации
- Gigabyte GA-8I915MD-GV Инструкция по эксплуатации
- Beko WMD 26100 T Инструкция по эксплуатации
- LG E612 Optimus L5 White Инструкция по эксплуатации
- Ballu Complete 500 Инструкция по эксплуатации
- Gigabyte GA-8I915GV-MF Инструкция по эксплуатации
- Transcend TS32GJF500 Инструкция по эксплуатации
- BBK LT4005S Инструкция по эксплуатации
- LG P713 Optimus L7 II White Инструкция по эксплуатации
- Ballu Complete 750 Инструкция по эксплуатации
- Gigabyte GA-8I915GM-G Инструкция по эксплуатации
- Transcend 4Gb/CF 133 Инструкция по эксплуатации
- Vitek VT-1571 Инструкция по эксплуатации
- LG P713 Optimus L7 II Black Инструкция по эксплуатации
- Ballu Complete 1000 Инструкция по эксплуатации
- Gigabyte GA-8I915GL-MFK Инструкция по эксплуатации
- Neff K9524X6 Инструкция по эксплуатации
- LG E455 Optimus L5 II Dual White Инструкция по эксплуатации