![Crate VTX212B [3/16] Congratulation](/img/pdf.png)
Crate VTX212B [3/16] Congratulation
![Crate VTX212B [3/16] Congratulation](/views2/1004832/page3/bg3.png)
3
Congratulations!
You are now the proud owner of the Crate VTX212 three-channel guitar amplifier
with Advanced Digital Signal Processing. This rugged amplifier combines outstanding
features with serious clean and distorted sounds. Dual DSP controls provide 15 “Multi”
effects and 15 Delay effects which can be combined for a wide variety of sounds. The
Save/Tap button allows you to manually set the tempo of many of the effects and to
save new DSP presets in the amplifier’s non-volatile memory. A separate Reverb
control adds even more to the array of effects. Front panel RCA CD Input jacks
allow you to play along with your favorite CD or tape. The rear panel Insert Jack allows
you to connect your effects for greater flexibility. Channel switching and DSP may be
controlled by means of a footswitch, which also allows access to two DSP presets on
each of the three channels. The top-mounted electronic tuner lets you get tuned and
stay in tune any time the amplifier is on.
Like all Crate products, your VTX212 amplifier is designed by musicians, and built
using only the best components. Extensive testing confirms that this amplifier is the
absolute best it can be.
In order to get the most out of your new amplifier, we strongly suggest that you read
the information contained in this guide before you begin playing.
And thank you for choosing
CCRRAATTEE
.
VTX212
Three-Channel Guitar Amplifier with Advanced DSP
IMPORTANT SAFETY INSTRUCTIONS
• READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
• DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. FOR
PROPER OPERATION, THIS UNIT REQUIRES 3” (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR
FLOW PROVISIONS IN THE CABINET.
• DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
• CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
• ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND
COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS.
• PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
• UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.
• ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR
SAFE OPERATION AND TO AVOID INJURY.
• WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE..
• SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
• OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND
PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PRO-
TECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS-
TURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
"IT IS NECESSARY FOR THE USER TO REFER TO THE INSTRUCTION MANUAL"
“ES NECESARIO QUE EL USUARIO SE REFIERA AL MANUAL DE INSTRUCCIONES.”
"REFERREZ-VOUS AU MANUAL D'UTILISATION"
EXPLANATION OF GRAPHICAL SYMBOLS:
EXPLICACION DE SIMBOLOS GRAFICOS:
EXPLICATION DES SYMBÔLES GRAPHIQUES:
"DANGEROUS VOLTAGE"
“VOLTAJE PELIGROSO”
"DANGER HAUTE TENSION"
=
=
PRECAUCION
RIESGO DE CORRIENTAZO
NO ABRA
PRECAUCION: PARA REDUCIR EL RIESGO DE INCENDIOS O DESCARGAS
ELECTRICAS, NO PERMITA QUE ESTE APARATO QUEDE EXPUESTO A LA
LLUVIA O LA HUMEDAD. PARA DISMINUOIR EL RIESGO DE CORRIENTAZO.
NO ABRA LA CUBIERTA. NO HAY PIEZAS ADENTRO QUE EL USARIO PUEDO
REPARAR DEJE TODO MANTENIMIENTO A LOS TECHNICOS CALIFICADOS.
ATTENTION
RISQUE D'ELECTROCUTION
NE PAS OUVRIR
ATTENTION: PROTÉGEZ CET APPAREIL DE LA PLUIE ET DE L'HUMIDITÉ
AFIN D'ÉVITER TOUT RISQUE D'INCENDIE OU D'ÉLECTROCUTION. POUR
REDUIRE D'ELECTROCUTION NE PAS ENLEVER LE COUVERCLE. AUCUNE
PIECE INTERNE N'EST REPRABLE PAR L'UTILISATEUR. POUR TOUTE
REPARATION, S'ADRESSER A UN TECHNICIEN QUALIFIE.
Содержание
- Vtx212 1
- Introduction the top panel 5 the bottom panel the dsp section storing your own presets restoring the factory presets more about the save tap button using the footswitch for more presets dsp factory presets 0 11 suggested settings 2 13 dsp fill in the blanks for user presets 4 system block diagram 5 technical specifications back cover 2
- Table of contents 2
- Three channel guitar amplifier with advanced dsp 2
- Congratulation 3
- The top panel 4
- Three channel guitar amplifier with advanced dsp 4
- Three channel guitar amplifier with advanced dsp 5
- Ac line cord not shown this grounded power cord is to be plugged into a grounded power outlet wired to current electrical codes and compatible with the voltage power and frequency requirements stated on the bot tom panel do not attempt to defeat the safety ground connection 6
- Clean solo rhythm footswitch use this jack to connect one of the footswitch cables to the three button footswitch supplied this allows you to remotely switch between the clean and distortion channels and between the solo and rhythm channels see page 9 6
- Dsp a b footswitch use this jack to connect one of the footswitch cables to the three button footswitch supplied this allows you to select between two presets for each of the three channels additional information about the operation of the footswitch is on page 9 6
- Extension speaker use this jack to connect the amplifier to an external speaker cabinet this jack is wired in series with the internal speaker s which remain active when an extension speaker is connected 6
- Fuse the fuse protects the amplifier from damages caused by a faulty ac power source and or other prob lems if the fuse opens replace it only with the same size and type if fuses continue to fail check the ac source if the source is okay contact your crate dealer for service information 6
- Insert use this jack to connect an external signal processor to the amplifier use crate s stp201 stp202 or stp203 stereo to mono y cord or an adapter such as crate s ypp117 and two 1 4 mono signal cables to con nect to the effect as shown below 6
- The bottom panel 6
- Three channel guitar amplifier with advanced dsp 6
- Dsp dsp 7
- The dsp section 7
- Three channel guitar amplifier with advanced dsp 7
- Each channel of the vtx212 has two factory assigned dsp presets as shown on pages 10 and 11 no matter what the settings of the dsp controls the preset is recalled when a channel is selected you may change the dsp settings by rotating the dsp con trols these changes will remain active until a different channel is selected but will not be there for later use unless they are saved to save a new dsp preset to a channel first make the desired dsp changes then press and hold the save tap button for about three seconds the save tap led will flash through three quick sequences indicating the preset was saved the new preset is stored for that channel and will remain in mem ory until a new preset is stored for that channel or the factory presets are restored 8
- More about the save tap button 8
- Restoring the factory presets 8
- Save tap save tap 8
- Storing your own presets 8
- The factory assigned dsp presets may be restored erasing any changes you have made turn the amplifier off press and hold the save tap button as you turn the amplifi er on the save tap led will flash through two quick sequences indicating the factory presets have been restored 8
- The multi effects and the delay effects may each have a different tap speed the default target for the save tap button is the delay control to select the multi control as the tap button s target rotate the multi control the save tap tempo function will auto matically revert back to the delay control 16 seconds after the multi control is rotated or when the tap speed was last changed for the multi effect 8
- The save tap button is used to set the tempo of an effect by pressing it twice within a one second time frame the time between the two taps sets the timing of the effect if the save tap button is pressed an odd number of times once three times etc the tim ing will default to the maximum one second time period 8
- Three channel guitar amplifier with advanced dsp 8
- The crate three button footswitch supplied with the vtx65 allows access to an addi tional dsp preset for each channel of the amplifier when the footswitch is connected to the amplifier as shown below the original dsp presets are active for each channel when the 3 footswitch led is illuminated these are referred to as dsp bank a when the 3 button is switched and the led is out a second dsp preset may be stored and recalled for each channel dsp bank b 9
- Three channel guitar amplifier with advanced dsp 9
- Using the footswitch for more presets 9
- Dsp dsp 10
- Dsp factory presets 10
- Save tap save tap 10
- Three channel guitar amplifier with advanced dsp 10
- Dsp dsp 11
- Dsp factory presets 11
- Save tap save tap 11
- Three channel guitar amplifier with advanced dsp 11
- Delay delay 12
- Multi multi 12
- Oceanic 12
- Reverb reverb 12
- Rhythm clean 12
- Rhythm solo 12
- Save tap save tap 12
- Suggested settings 12
- Super funk 12
- Three channel guitar amplifier with advanced dsp 12
- Volume shape gain low mid high level low mid high level gain 12
- Delay delay 13
- Haze faze 13
- Multi multi 13
- Octanator 13
- Reverb reverb 13
- Rhythm clean 13
- Rhythm solo 13
- Save tap save tap 13
- Solo wah 13
- Suggested settings 13
- Three channel guitar amplifier with advanced dsp 13
- Volume shape gain low mid high level low mid high level gain 13
- Dsp dsp 14
- Dsp fill in the blanks user settings 14
- Save tap save tap 14
- Three channel guitar amplifier with advanced dsp 14
- System block diagram 15
- Three channel guitar amplifier with advanced dsp 15
- Three channel guitar amplifier with advanced dsp 16
- Vtx212 technical specifications 16
Похожие устройства
- Bosch MSM 6B250 Инструкция по эксплуатации
- Beko HIC 64403 TX Инструкция по эксплуатации
- Bosch SKS 50E11 EU Инструкция по эксплуатации
- Condtrol Mettro 60 Инструкция по эксплуатации
- Fluke 115С Инструкция по эксплуатации
- Panasonic NN-C785JFZPE Инструкция по эксплуатации
- Crate VTX30B Инструкция по эксплуатации
- Bosch MSM 6B500 Инструкция по эксплуатации
- Beko DIN 5833 Extra Инструкция по эксплуатации
- Bosch SKS 50E01 EU Инструкция по эксплуатации
- X-Line SNIPER 40 М Х00118 Инструкция по эксплуатации
- Fluke 117С Инструкция по эксплуатации
- Panasonic NN-C784M Инструкция по эксплуатации
- Beko OSC 22130 X Инструкция по эксплуатации
- Crate KXB50U Инструкция по эксплуатации
- Electrolux ESF-63021 Инструкция по эксплуатации
- Fluke 123 Инструкция по эксплуатации
- Panasonic NN-C781JF Инструкция по эксплуатации
- Crate GT15 Инструкция по эксплуатации
- Beko CSK 29000 S Инструкция по эксплуатации