Yamaha MusicCast SUB 100 (NS-NSW100) [12/184] Connecting to a network

CONNECTIONS

12 En

Preparations for network connection

This unit can be connected to a network either via a cable or wirelessly. Choose the connection method that’s appropriate

for your situation.

Make settings so that this unit can communicate wirelessly.

1. Set the rear panel INPUT switch to NET.

2. Set the rear panel WIRELESS switch to

AUTO.

NOTICE

Do not connect a network cable to the NETWORK

port. If a network cable is connected, the wired

connection takes priority and wireless connection is

not possible.

Use a commercially available STP network cable (CAT-5

or higher straight cable) to connect this unit to your router.

1. Set the rear panel INPUT switch to NET.

Set the rear panel WIRELESS switch to OFF.

3. Connect a network cable to the

NETWORK port.

NOTICE

If you want to connect this unit via a wired connection

and play back music, all of the MusicCast Surround/

Stereo compatible devices that you want to link (such

as a sound bar or a wireless streaming speaker) must be

connected via a wired LAN.

Powering-on this unit

1. Insert the power cord plug into an AC

outlet.

2. Press the rear panel A (STANDBY/ON)

button to turn on the power of this unit.

NOTE

● If the network is starting up, the STATUS indicator on the top panel flashes green.

● If you’re using a wired connection, the LED on the inside of the NETWORK port flashes when connected to the router.

NOTICE

● When turning on the power in your audio system, always turn on this unit last.

Connecting to a network

If connecting wirelessly

2 1

(rear panel)

If connecting via a cable

(rear panel)

to an AC outlet

(rear panel)