Home
Главная
Linksys
E3000
Инструкция по эксплуатации Страница: 17

Linksys E3000 [17/80] Static ip

High Performance Wireless-N Router

Linksys E3000 Chapter 3: Advanced Configuration

Automatic Configuration - DHCP

The default Internet Connection Type is set to Automatic

Configuration - DHCP. Keep the default only if your ISP

supports DHCP (Dynamic Host Configuration Protocol) or

if you connect using a dynamic IP Address. (This option

usually applies to cable connections.)

Internet Connection Type > Automatic Configuration - DHCP

Static IP

If you are required to use a permanent IP address to

connect to the Internet, select Static IP.

Internet Connection Type > Static IP

IP Address This is the Router’s IP address, when seen

from the Internet. Your ISP will provide you with the IP

address you need to enter here.

Subnet Mask This is the Router’s Subnet Mask, as seen

by users on the Internet (including your ISP). Your ISP will

provide you with the Subnet Mask.

Default Gateway Your ISP will provide you with the

Gateway address, which is the ISP server’s IP address.

DNS Your ISP will provide you with at least one DNS

(Domain Name System) server IP address.

PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol

over Ethernet) to establish Internet connections. If you are

connected to the Internet through a DSL line, check with

your ISP to see if they use PPPoE. If they do, you will have

to enable PPPoE.

Internet Connection Type > PPPoE

User Name and Password Enter the User Name and

Password provided by your ISP.

Service Name (optional) If provided by your ISP, enter

the Service Name.

Connect on Demand: Max Idle Time You can configure

the Router to cut the Internet connection after it has

been inactive for a specified period of time (Max Idle

Time). If your Internet connection has been terminated

due to inactivity, Connect on Demand enables the Router

to automatically re-establish your connection as soon

as you attempt to access the Internet again. To use this

option, select Connect on Demand. In the Max Idle Time

field, enter the number of minutes you want to elapse

before your Internet connection terminates. The default is

5minutes.

Keep Alive: Redial Period If you select this option, the

Router will periodically check your Internet connection. If

you are disconnected, then the Router will automatically

re-establish your connection. To use this option, select

Keep Alive. In the Redial Period field, specify how often

the Router should check the Internet connection. The

default is 30 seconds.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a service that

applies to connections in Europe only.

Internet Connection Type > PPTP

If your ISP supports DHCP or you are connecting through

a dynamic IP address, then select Obtain an IP Address

Automatically. If you are required to use a permanent IP

address to connect to the Internet, then select Specify an

IP Address. Then configure the following:

Internet IP Address This is the Router’s IP address, as

seen from the Internet. Your ISP will provide you with the

IP Address you need to specify here.