Home
Главная
IVT
Электроразжигатель
EF-2000
Инструкция по эксплуатации Страница: 8

IVT EF-2000 [8/40] Initial operation

Instruction manual

ATTENTION! DANGER OF ELECTRIC

SHOCK!

Consider working area environment. Do not expose

power tools to rain. Do not use power tools in damp

or wet locations. Keep work area well lit and dry. Try

to prevent the device from getting wet or being

exposed to humidity. Do not leave it outside

overnight. Water entering a power tool will increase

the risk of electric shock.

∙ The power supply cable should be checked

regularly and, before using it, make sure the cable is

not damaged or worn out. If the cable is not in good

condition, do not use the appliance; take it to an

authorized service Center.

∙ When tool is used outdoor, only use an extension

cable that is suitable for outdoor use and which is

marked for this specic use. Keep it away from the

working area, from damp, wet or oily surfaces and away

from heat and ammable materials.

∙ Avoid any accidental starting: make sure that the

power switch (if present) is in the «off» position, before

plugging the tool in.

∙ Remove adjusting keys or wrenches before turning

the tool on.

∙ Do not use the tool if the switch does not turn the

tool on or off. Any tool that cannot be controlled with the

switch is dangerous and must be repaired.

WARNING! During the use of certain

power tools, some dust containing

chemicals known to cause cancer,

may occur.

Some of these chemicals are: lead from lead based

paints, crystalline silica from bricks and cement and

other masonry products, arsenic and chromium from

chemically treated lumber and other dangerous

products. If dust is present, your risk from these

exposures varies, depending on how often you do this

type of work. To reduce your exposure to these

chemicals, any time you do pulverulent operations,

work in a well ventilated area and work with

approved safety equipment, such as dust masks

that are specially designed to lter out microscopic

particles.

∙ If the appliance strikes a foreign body, examine the

device for signs of damage and carry out any necessary

repairs before restarting and continuing to work.

∙ If the appliance starts to vibrate abnormally, turn

it off and check for the cause immediately. Vibration is

generally a warning of trouble.

∙ Always switch off the appliance and wait until

the device completely stops whenever you leave

the machine, before carrying out maintenance,

before changing accessories, checking, cleaning,

troubleshooting or working on the appliance.

∙ It is forbidden to move or modify any of the internal

parts of the device.

Specic safety rules

∙ Make sure that the switch is in the “0” position and

that the tool is completely turned off before putting the

plug in the socket.

∙ The aluminium heat shield get very hot, be careful

and wait until it will be completely cooled before

touching it.

∙ Take proper safety measures to prevent injury,

wear protective gloves to avoid burns.

∙ Always keep ngers, hands, body, and clothing

away from the heated components of this tool.

∙ Never use lighting liquid and the tool at the same

time.

∙ Always make sure the working area is well

ventilated.

∙ Never direct the ow at people or animals.

∙ Never use the tool as a hair dryer.

∙ Do not keep the tool pushed to the heated coal, the

protective surface might melt and become deformed.

∙ During use and for a short time after use, the tool

must not touch other objects than its targets (wood,

coal).

∙ Improper use can lead to re.

∙ Never obstruct the tool ow, never block the air inlet

or outlet or nozzles.

∙ Pay attention to ashes and embers that might stir

up in the air during use. A re may arise if the appliance

is not used with care.

∙ Before putting the equipment away after use, let it

cool down completely.

UNPACKING

When unpacking, check to make sure that all

components are included. Refer to the drawings on this

manual. If any parts are missing or broken, please call

an IVT assistance center.

INITIAL OPERATION

Always use the correct supply voltage: the power supply

voltage must match the information quoted on the tool

identication plate.

IVT EF-2000 [8/40] Initial operation

Содержание

Похожие устройства