![Neff D66S34N0 [14/24] Installation instructions](/img/pdf.png)
Neff D66S34N0 [14/24] Installation instructions
![Neff D66S34N0 [14/24] Installation instructions](/views2/1050810/page14/bge.png)
14
If a permanent connection is required
A disconnector must be provided on the
installation side. Switches with a contact
opening of more than 3 mm and all-pole
disconnection are regarded as disconnectors.
This includes LS switches, fuses and contactors.
Electrical specications
WARNING: THIS APPLIANCE MUST BE
EARTHED
IMPORTANT: Fitting a Different Plug:
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow – Earth
Blue – Neutral
Brown – Live
If you fit your own plug, the colours of these
wires may not correspond with the identifying
marks on the plug terminals.
This is what you have to do:
1. Connect the green and yellow (Earth) wire
to the terminal in the plug marked ‘E’ or
with the symbol <, or coloured green or
green and yellow.
2. Connect the blue (Neutral) wire to the
terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (Live) wire to the
terminal marked ‘L’, or coloured red.
The required connection data can be found on
the rating plate inside the appliance when the
grease lters have been removed.
Length of the power cord: approx. 1.30 m.
This extractor hood complies with the EC
interference suppression regulations.
ELECTRICAL CONNECTION
Before connecting the appliance to the
power supply, always follow the instructions
and warnings in the chapter entitled ”Safety
instructions”!
The extractor hood may only be connected
by a qualied electrician who is familiar with
the regulations of the relevant electricity
supply company.
RISK OF INJURY
If the power cord of the extractor hood is
damaged, it must be replaced by the
manufacturer, his customer service or a
similarly qualied person to prevent hazardous
situations.
The extractor hood may be connected to a
correctly installed earthed socket only.
Attach the earthed socket as directly as
possible behind the ue duct.
– The earthed socket should be connected via
its own circuit.
– If the earthed socket is no longer accessible
following installation of the extractor hood,
a disconnector must be tted as for a
permanent connection.
Installation instructions
Содержание
- Neff uk ltd 1
- Changing the bulbs 3
- Cleaning and care 3
- General information 3
- Installation 3
- Installation instructions 3
- Operating modes 3
- Operation 3
- Removing and installing the grease filters 3
- Safety instructions 3
- Table of contents 3
- Disposal of the old appliance 4
- Disposal of transport packaging 4
- E no fd 4
- Faults 4
- General information 4
- Intended use 5
- Safety instructions 5
- Simultaneous operation of the extractor hood with a heating appliance which is dependent on ambient air 5
- Technical safety 5
- Safety instructions 6
- Special information for gas cookers 6
- Correct installation 7
- Proper use 7
- Safety instructions 7
- Appliance dimensions circulating air 8
- Appliance dimensions exhaust air 8
- Circulating air mode 8
- Exhaust air mode 8
- Operating modes 8
- For appliances with intensive setting 9
- Operation 9
- Switching off the fan 9
- Switching on the fan and selecting the fan settings 9
- Appliance surfaces 10
- By hand 10
- Cleaning and care 10
- Cleaning the metal mesh grease filters 10
- In the dishwasher 10
- Metal mesh grease filters 10
- Changing the activated carbon filter 11
- Installing and removing the activated carbon filters 11
- Removing and installing the grease filters 11
- Removing and installing the metal mesh grease filters 11
- Changing the bulbs 12
- Changing the filament bulbs 12
- Changing the halogen bulbs 12
- Connecting pipes 13
- Connection of 120 mm ø exhaust air pipe 13
- Connection of 150 mm ø exhaust air pipe recommended size 13
- Exhaust air mode 13
- Installation instructions 13
- To ensure optimum performance the extractor hood requires 13
- Electrical specifications 14
- If a permanent connection is required 14
- Installation instructions 14
- Installation 15
- Installation preparations 15
- Max weight in kg 40 15
- Preparing the wall 15
- Installation 16
- Installation 17
- Installing the flue ducts 17
- 347 544 24
Похожие устройства
- Yamaha RX-V1067 Black Инструкция по эксплуатации
- Lessar INVERTO LS/LU-HE09KFA2 Инструкция по эксплуатации
- Neff I79T67N0 Инструкция по эксплуатации
- Kaiser AC 150 Инструкция по эксплуатации
- Yamaha YHT-S400 Black Инструкция по эксплуатации
- Neff I71F57N0 Инструкция по эксплуатации
- Toshiba 38D9UXR Инструкция по эксплуатации
- Lessar LUXAIR LS/LU-H12KHA2 Инструкция по эксплуатации
- Akai LTA-20E302 Инструкция по эксплуатации
- Lessar LUXAIR LS/LU-H09KHA2 Инструкция по эксплуатации
- Neff D76M35N0 Инструкция по эксплуатации
- Yamaha YST SW216 Black Инструкция по эксплуатации
- Lessar LUXAIR LS/LU-H07KHA2 Инструкция по эксплуатации
- Samsung DSB-A300W Инструкция по эксплуатации
- Neff D99W45N1 Инструкция по эксплуатации
- Neff D99W45S1 Инструкция по эксплуатации
- Lessar LUXAIR INVERTER LS/LU-HE12KHA2 Инструкция по эксплуатации
- Technics SA-DX940 Инструкция по эксплуатации
- Yamaha YSP-2200 Black Инструкция по эксплуатации
- Neff D69S57N0 Инструкция по эксплуатации