Dometic CoolAir RTX-IK для Renault T + C, H1 [11/194] Preparing the unit

Dometic CoolAir RTX-IK для Renault T + C, H1 [11/194] Preparing the unit
9
EN
CoolAir RTX1000, RTX2000 Installation
7.3 Preparing the unit
A
Proceed as follows (fig. 6):
Place the parking cooler on a work surface with the casing facing down.
Screw the 8 self-tapping M8 threaded plugs into the blind holes marked “1”.
To do so, use the 1/4" bit supplied.
Screw the 6 self-tapping M8 threaded plugs into the blind holes marked “2”.
To do so, use the 1/4" bit supplied.
Fix the two sheet metals with 3 rounded head screws M8 x 16 mm each in the
thread plugs marked with “2” .
7.4 Attaching the seal for the cab roof
A
Glue the sealing strip to the cab roof (fig. 7 A).
Follow the contour of the roof hatch opening. The join between the ends of
the seal should be at the back.
Apply a flexible, non-hardening butyl sealant (e.g. SikaLastomer-710) to the
join between the ends of the sealing strip and to the top edge of the sealing
strip (fig. 7 B).
NOTICE!
When preparing the unit on the work surface, make sure it is secured against
falling off.
Make sure that the work surface is clean and level to ensure that the unit is not
damaged.
NOTICE!
Ensure that the surface where the seal between the unit and the cab roof is to
be glued is clean (free of dust, oil, etc.).
RTX1000-RTX2000-Renault-H1--I-16s.book Seite 9 Mittwoch, 29. November 2017 7:14 19

Содержание

Похожие устройства

Скачать