Dometic TEC 60 [23/240] Connecting the electrical power to the generator

TEC60, TEC60LPG Connecting the electrical power to the generator

10 Connecting the electrical power to the

generator

10.1 Important notes on the electrical connection

• Only a qualified electrician should connect the generator to the electrical power.

• Check that the voltage specification on the type plate is the same as that of the

power supply.

• Do not lay the 230 Vw mains cable and the 12/24 Vg cable together in the

same cable duct.

• Do not lay cables which are loose or bent next to electrically conductive material

(metal).

• Connect the generator to a power circuit which can supply the necessary current

(see chapter “Technical data” on page 27).

• Select the cross-section of the cable as follows:

– 230 V: 6 mm²

– Battery connection (length < 6 m): 16 mm²

– Battery connection (length > 6 m): 25 mm²

• Install a manual main switch which can disconnect all the consumers from the

generator with the exception of the battery.

DANGER! Danger of electrocution

Make sure there is no voltage at electrically operated components

before carrying out work on them!

NOTE

Observe the applicable guidelines in the country of the consumer.

TEC60-TEC60LPG-I-16s.book Seite 23 Freitag, 15. Juli 2016 8:14 20