Telefunken TF-1594U Black [3/16] Backlight brightness
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Telefunken TF-1594U Black [3/16] Backlight brightness

Telefunken TF-1594U Black [3/16] Backlight brightness
Instruction manual
3
Important safeguards
•
The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit
•
Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• Do not disassemble the unit yourselves
Refer servicing to qualified service personnel
All the illustrations in this manual are
schematic images, which may differ from
actual objects.
Power supply
Battery operation
• Insert 2 ААA batteries (not included)
to the terminals inside the battery
compartment according to the polarity marks
(+ and -). Your set will not work normally from
the battery supply, but there is now the
advantage that, in case of a mains current
failure or power outage, your clock will
continue to work. The clock display will not
light up, the clock time and alarm setting will
be held in the clock memory by the battery
back-up system.
This enables you to move the set from place
to place without re-setting the clock every time.
The battery back-up system is only meant to
be used for short-term power failures. For
longer durations the batteries may become
exhausted or there may be some deviation in
accuracy.
• When the batteries are exhausted, they
check that the voltage indicated on the rating
label corresponds to the mains voltage in your
location.
The time will start to flash.
General operations
Setting the time and date
• Press and hold the CLOCK/MEM. button.
to increase the HOUR. You can press and hold
the button to increase the number quickly.
• Press the HOUR/SKIP- button
to increase the MINUTES. You can press and hold
the button to increase the number quickly.
• Press the MIN/SKIP+ button
CLOCK/MEM. button again to confirm.
• Once time is set correctly, press the
buttons to select the year. Press CLOCK/MEM.
to confirm.
• Next set the date. Press the SKIP+/SKIP-
the levels of display backlight brightness (low,
middle, high). The default is high.
Backlight brightness
• Press the DIM button to select between
should be removed from the set to prevent
leakage. If you do not wish to take advantage
of the battery back-up system, your set will
work normally without batteries. However, if
disconnected from the mains, the clock
figures will flash when the mains are
reconnected and you must re-set the clock.
DС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
• Plug the supplied AC/DC power
adaptor into the DC adaptor input on
the back
of the unit. Connect the power cord to the AC
household main outlet. Make sure the voltage
is compatible.
• Always remember to disconnect
the power cord from the main supply before
disconnecting it from the unit.
and day. Press CLOCK/MEM. to confirm.
• Press the SKIP+/SKIP- to select the month
The unit will automatically exit the setting mode
if no buttons are pressed for 5 seconds.
• The time and date are now set.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

как отключить будильник, чтобы он не включался НИКОГДА?
1 год назад

Ответы 1

Как установить будильник на данном устройстве?
1 год назад