Monsher TEXNO 60 W [11/36] Installation

11English

INSTALLATION

The minimum distance between the supporting surface for the cooking

equipment on the hob and the lowest part of the range hood must be not less than

45 cm from electric cookers and 50 cm from gas or mixed cookers.

If the instructions for installation for the gas hob specify a greater distance, this

must be adhered to.

Electrical connection

The mains power supply must correspond to the rating indicated on the plate

situated inside the hood. If provided with a plug connect the hood to a socket in

compliance with current regulations and positioned in an accessible area, after

installation. If it not fitted with a plug (direct mains connection) or if the plug is

not located in an accessible area, after installation, apply a double pole switch

in accordance with standards which assures the complete disconnection of the

mains under conditions relating to over-current category III, in accordance with

installation instructions.

Warning! Before re-connecting the hood circuit to the mains supply and checking

the efficient function, always check that the mains cable is correctly assembled.

The hood is provided with a special power cable ; if the cable is damaged, request

a new one from Technical Service.

Mounting

Very heavy product; hood handling and installation must be carried out by at

least two persons.

Before beginning installation:

; Check that the product purchased is of a suitable size for the chosen installation

area.

; Remove the charcoal (*) filter/s if supplied (see also relative paragraph). This/

these is/are to be mounted only if you want lo use the hood in the filtering

version.

; Check (for transport reasons) that there is no other supplied material inside

the hood (e.g. packets with screws (*), guarantees (*), etc.), eventually removing

them and keeping them.