Monsher TEXNO 60 W [12/36] Operation

English

; If possible, disconnect and move freestanding or slide-in range from cabinet

opening to provide easier access to rear wall/ceiling. Otherwise put a thick,

protective covering over countertop, cooktop or range to protect from damage

and debris. Select a flat surface for assembling the unit. Cover that surface with

a protective covering and place all canopy hood parts and hardware in it.

; In addition check whether near the installation area of the hood (in the area

accessible also with the hood mounted) an electric socket is available and it

is possible to connect a fumes discharge device to the outside (only suction

version).

; Carry out all the masonry work necessary (e.g. installation of an electric socket

and/or a hole for the passage of the discharge tube).

Expansion wall plugs are provided to secure the hood to most types of walls/

ceilings. However, a qualified technician must verify suitability of the materials in

accordance with the type of wall/ceiling. The wall/ceiling must be strong enough

to take the weight of the hood. Do not tile, grout or silicone this appliance to the

wall. Surface mounting only.

OPERATION

Use the high suction speed in cases of concentrated kitchen vapours. It is

recommended that the cooker hood suction is switched on for 5 minutes prior

to cooking and to leave in operation during cooking and for another 15 minutes

approximately after terminating cooking.

To select the functions of the hood, simply touch the controls.

1. Stand by/ON display

2. ON/OFF suction speed (power) 1

ON/OFF suction speed (power) 2

ON/OFF suction speed (power) 3

3. ON/OFF lights