Epson Stylus Color IIs Инструкция по эксплуатации онлайн [27/31] 49102

EPSON Imaging Technology Center Page: 27

Revision: 3

Notes:

- This command must be executed before paper feeding.

- The default mode used when n2=00, or if no command is sent is as follows:

- If black and color cartridges are both installed and neither are empty, the

Standard Color Performance Mode is the default.

- If the color cartridge is empty or removed, the Higher Performance

Monochrome Mode is the default. Note, with the Stylus COLOR 400

and Stylus COLOR 600, the printer will enter an error condition.

- This command is reset by the initialization command (ESC @) and the default

mode is used.