IKA ROCKER 2D basic 0004002000 [12/52] Safety instructions

IKA ROCKER 2D basic 0004002000 [12/52] Safety instructions
12
Unpacking
Unpacking
Please unpack the device carefully.
In the case of any damage a detailed report must be sent immediately (post, rail or forwarder).
Delivery scope
IKA
®
Rocker 2D basic/digital, depending on the type that was ordered
Mat
AC adapter, see Fig. 1
Operating instructions
Warranty card
Fig. 1
Safety instructions
The appliance is not suitable for manual operation.
Beware of the risk of
- flammable materials
- glass breakage as a result of mechanical shaking power
The appliance may heat up when in use.
Only process media that will not react dangerously to the
extra energy produced through processing. This also applies
to any extra energy produced in other ways, e.g. through
light irradiation.
Process pathogenic materials only in closed vessels under
a suitable extractor hood. Please contact IKA
®
if you have
any questions.
Do not operate the appliance in explosive atmospheres,
with hazardous substances or under water.
Safe operation is only guaranteed with the accessories de-
scribed in the ”Accessories” chapter.
Always disconnect the plug before fitting accessories.
Disconnect the device from the power supply before you
open the cover or adjust the inclination angle of the device
shaking table.
Do not operate the device with the cover open.
The appliance can only be disconnected from the mains
supply by pulling out the mains plug or the connector plug.
The socket for the mains cord must be easily accessible.
The IKA
®
Rocker 2D basic does not restart automatically
when power is restored after a power outage. If the IKA
®
Rocker 2D digital is running in mode A it does not restart
automatically when power is restored after a power outage.
For protection of the equipment
The appliance may only be opened by experts.
The voltage stated on the type plate must correspond to the
mains voltage.
Removable parts must be refitted to the appliance to pre-
vent the infiltration of foreign objects, liquids etc..
Protect the appliance and accessories from bumps and im-
pacts.
The device must only be operated with the original plug-in
power supply unit.
For your protection
Read the operating instructions in full be-fore
starting up and follow the safety instructions.
Keep the operating instructions in a place where they can
be accessed by everyone.
Ensure that only trained staff work with the appliance.
Follow the safety instructions, guidelines, occupational
health and safety and accident prevention regulations.
Wear your personal protective equipment in accordance
with the hazard category of the medium to be processed.
Otherwise there is a risk of:
- splashing liquids
- projectile parts
- body parts, hair, clothing and jewellery getting caught.
Set up the device in a spacious area on an even, stable,
clean, non-slip, dry and fireproof surface
.
The feet of the appliance must be clean and undamaged.
Check the appliance and accessories beforehand for dama-
ge each time you use them. Do not use damaged compo-
nents.
Caution!
There is a crush hazard between the moving
shaking table and the casing.
Place the vessels securely on the shaking table or on the
chosen mat or rack.
Firmly secure the accessories and vessels in place, otherwise
shaking vessels could be damaged or projected out.
Position one single shaking vessel in the centre and several
shaking vessels so that they are evenly spread out.
Always load the samples evenly on the device.
The weight of the load must not exceed 2 kg. Do not ex-
ceed the maximum permissible shaking weights.
Do not move or transport the device when it is operating or
connected to the power supply.
Reduce the speed if
- the medium splashes out of the vessel because the speed
is too high
- the appliance is not running smoothly
-
dynamic forces start to cause the device and/or the vessels
placed on it to move around.

Содержание

Скачать