![Homa Sanimaster G 250-16 D [12/36] Declaration of conformity](/img/pdf.png)
Homa Sanimaster G 250-16 D [12/36] Declaration of conformity
![Homa Saniboy G 180-26 D [12/36] Declaration of conformity](/views2/1549702/page12/bgc.png)
12
Contents
Contents Page
1. EC Declaration of Conformity 11
2. Safety Warnings 12
2.1. General instructions
12
2.2. General Safety Precautions
12
3. Applications and Technical
Description
12
3.1. Applications
12
3.2. Product Description
12
3.3. Technical Data
13
3.4. Operation Conditions
13
3.5. Explosive Enviroments
13
4. Warranty 13
5. Transport and Storage 13
6. Electrical Connection 13
6.1. General instructions
13
6.2. Electronic control box
14
6.3. Check of Direction of Rotation
15
7. Installation 15
8. Start-Up 16
9. Maintenance and Repair 16
10. Fault Finding Chart 17
11. Warranty Conditions and Warranty
Receipt
17
13. Installations 25
14. Dimensions 26
15. Spare Part List and Drawings 28
15.1. Spare Part List Collecting Tank
28
15.2. Spare Part Drawings Collecting Tank
30
15.3. Spare Part List Pump
31
15.4. Spare Part Drawings Pump
33
16. Order Sheet for Spare Parts 34
1. Declaration of Conformity
EC Declaration of conformity in line with the EC Ma-
chinery Directive 89/392/EEC, Appendix IIA
We, HOMA Pumpenfabrik GmbH, Industriestrasse 1,
D-53819 Neunkirchen-Seelscheid, hereby declare that in
respect to their design and construction the following
pump types, in the form in which they are marketed by us,
conform to the relevant fundamental safety and health
requirements of the EC Machine Directives...:
Saniboy I Saniboy I R Saniboy II
Sanimaster Saniboy G Sanimaster G
EC-Directives to which the pumps conform:
EC Machinery Directive 98/ 37/EEC
EC Directive, electromagnetic
compatibility
89/336/EEC
as amended 92/ 31/EEC
as amended 93/ 68/EEC
EC Low Voltage Directive
1)
73/ 23/EEC
EC Directive, explosion-
prooved operating material
2)
94/ 9/EEC
EC Directive, construction
products
89/106/EEC
Relevant harmonized industrial standards:
ES 60335-2-41
1)
ES 60335-1
1)
ES 60034 Part 5
ES 60204 Part 1
1)
ES 61000-6-1 ES 61000-6-2
ES 61000-6-3 ES 61000-6-4 ES 55014-1
ES 55014-2 ES 61000-3-2 ES 61000-3-3
ES 12050 1-4 ES 292 ES 50014/18/19/20
2)
Specially applied national standards and technical
specifications (other applied standards for general
mechanical engineering are deposited at the con-
struction office):
ISO 9906 DIN 24250
(Dr. Klaus Hoffmann, Management)
01.06.2004 HOMA Pumpenfabrik GmbH
1)
does not apply to Ex models
2)
only applies to Ex models
Established: Totzke Index: 0
Date: 01.06.2004 Current number: CE 1
Содержание
- Baureihe series serie 1
- Montage und bedienungsanleitung installation and operation instruction manual montage en bedrijfsinstrukties 1
- Saniboy i saniboy i r saniboy ii sanimaster saniboy g sanimaster g 1
- Inhaltsverzeichnis 3
- Konformitätserklärung 3
- Einsatz und technische beschreibung 4
- Sicherheitshinweise 4
- Elektroanschluss 5
- Garantie 5
- Transport und lagerung 5
- Hinweis für den kundendienst 7
- Montage und installation 8
- Inbetriebnahme 9
- Wartung und reparatur 9
- Für die hebeanlage nr leisten wir entsprechend unseren garantiebedingungen 10
- Garantiebedingungen 10
- Garantieschein 10
- Monate garantie 10
- Störungen ursache abhilfe 10
- Vor jeder wartung pumpe vom stromnetz trennen netzstecker ziehen 10
- Homa vertragskundendienste im bundesgebiet 11
- Contents 12
- Declaration of conformity 12
- Applications and technical description 13
- Safety warnings 13
- Before operation an expert check must secure that the required electrical protection measures exist the connection to ground earthing isolating transformer fault current breaker or fault voltags circuit must correspond to the guidelines set forth by the responsible power plant 14
- Electrical connection 14
- Explosive environments 14
- For each individual installation the explosion classifi cation ex class of the pump must be approved by the localauthorities 14
- For operation of the pumps in explosive environments only models with explosion proof motors ex model must be used 14
- General instructions 14
- Make sure that the electrical pin and socket connec tions are installed flood and moisture safe before start ing operation check the cable and the plug against dam ages 14
- Never use the cable the pump or the pressure com pensation hose to lift lower or transport the unit 14
- Operating conditions maximum liquid temperature 35 c short term up to 60 c density of pumped liquid max 1100 kg 14
- Our warranty only covers pumps which are installed and operated in accordance with these installation and opera tion instructions and accepted codes of good practice and being used for the applications mentioned in these in structions 14
- Ph value of pumped liquid 5 up to 11 operation the motors are designed for continuous op eration s1 with fully submerged motor maximum 15 starts per hour our standard warranty and maintenance regulations refer to intermittent operation for reduced warranty periods and service intervals due to continuous operating conditions please contact our service depart ment 14
- Sanimaster t sanimaster g twin station the controller of sanimaster automatically ensures an even distribution of operating hours on both pumps by changing the starting sequence after each pump stop when the liquid level in the tank reaches the start level one pumps is started if the liquid level rises further the other pump is started as well this pump will run until its stop level is reached the operating pump will stop when the lowest stop level is reached if the liquid level continues to rise when both pumps are operating an alarm is given until the liquid level is low ered below the alarm level 3 technical data 14
- The electrical connection of the pump should be carried out in accordance with local requirements the operating voltage and frequency are marked on the pump and controller nameplates voltage tolerance 6 up to 10 of the voltage stated on the nameplates make sure that the lifting station is suitable for the electricity supply available at the installation site homa disposal units are supplied with a control box controller for single phase pumps also incorporate the operating capacitors required the pump motors have a thermal switch incorporated in the motor windings the thermal switch protects the motor from overheating by cutting off the supply to the pump via the controller the electrical connection must be carried out in accor dance with the marking on the cable to the controller the lifting stations require no additional motor protection connect the units to the mains supply 14
- The end of the pump power supply cable must not be submerged in order to prevent water from penetrating through the cable into the motor 14
- The normal separate motor starter control box of standard as well as of explosion proof pumps must not be installed in explosive enviroments 14
- The unit may be transported and stored in vertical or horizontal position make sure that it cannot roll or fall over for longer periods of storage the unit should be protected against moisture frost or heat 14
- The voltage required in the technical data sheet must correspond to the existing line voltage 14
- Transport and storage 14
- Warranty 14
- Installation 16
- Maintenance and repair 17
- Start up 17
- Before maintenance or repair disconnect the pump from the power supply to avoid accidental starting of the pump 18
- Disposal unit no correspond to our warranty conditions we achieve 18
- Fault finding chart 18
- Months of warranty 18
- Warranty conditions 18
- Warranty receipt 18
- Conformiteitsverklaring 19
- Inhoudsopgave 19
- Inzetbaarheid en technische beschrijving 20
- Veiligheidsvoorschriften 20
- Elektrische aansluiting 21
- Garantie 21
- Transport en opslag 21
- Montage en installatie 23
- In bedrijf stellen 24
- Onderhoud en service 24
- Garantiebepalingen 25
- Garantiebewijs 25
- Homa klantenservice 25
- Maanden garantie 25
- Storingen oorzaken oplossingen 25
- Voor _______________________ nr _______________________ geven wij conform onze bovenstaande garantiebepalingen 25
- Installationsbeispiele installations installatievoorbeelden 26
- Baumaße dimensions afmetingen 27
- Achtung die untenstehende liste enthält teile die nicht in jedem pumpentyp vorhanden sind deshalb bei ersatzteilbestellung bitte immer angeben pumpentyp baujahr siehe typenschild auf der pumpe zeichnungsposition xx genaue positionsnummer bitte aus der ersatzteilzeichnung entnehmen und bei bestell ung angeben siehe unten artikelbezeichnung siehe unten gewünschte stückzahl 29
- Attention the following list contains parts that do not correspond to every pump type for spare part or ders please always give pump type the year of construction see the pump label position number xx take the exact position number from the drawing of the specific pump model see hereafter part description see hereafter required quantity 29
- Ersatzteilliste für sammelbehälter 29
- Ersatzteilliste und zeichnungen 29
- Saniboy g sanimaster g 29
- Saniboy i r saniboy ii sanimaster s sanimaster t 29
- Spare part list and drawings 29
- Spare part list for collecting tank 29
- Let op de onderstaande lijst bevat delen die niet in elk pomtype aanwezig zijn daarom bij onderdelen bestelling altijd vermelden pomptype bouwjaar zie typeplaatje tekeningpositie xx exacte positienummer uit de onder delenlijst vermelden bij bestelling artikelomschrijving gewenste aantal 30
- Onderdelenlijst 30
- Onderdelenlijst en onderdelentekening 30
- Saniboy g sanimaster g 30
- Saniboy i r saniboy ii sanimaster s sanimaster t 30
- Achtung die untenstehende liste enthält teile die nicht in jedem pumpentyp vorhanden sind deshalb bei ersatzteilbestellung bitte immer angeben pumpentyp baujahr siehe typenschild auf der pumpe zeichnungsposition xx genaue positionsnummer bitte aus der ersatzteilzeichnung entnehmen und bei bestellung angeben siehe unten artikelbezeichnung siehe unten gewünschte stückzahl 32
- Attention the following list contains parts that do not correspond to every pump type for spare part or ders please always give pump type the year of construction see the pump label position number xx take the exact position number from the drawing of the specific pump model see hereafter part description see hereafter required quantity 32
- Ersatzteilliste für pumpe 32
- Spare part list for submersible pump 32
- Let op de onderstaande lijst bevat delen die niet in elk pomtype aanwezig zijn daarom bij onderdelen bestelling altijd vermelden pomptype bouwjaar zie typeplaatje tekeningpositie xx exacte positienummer uit de onder delenlijst vermelden bij bestelling artikelomschrijving gewenste aantal 33
- Onderdelenlijst pomp 33
Похожие устройства
- Homa Sanimaster G 180-26 D Инструкция по эксплуатации
- Homa Sanimaster G 250-26 D Инструкция по эксплуатации
- Homa Saniboy I R Инструкция по эксплуатации
- Homa Saniboy II Инструкция по эксплуатации
- Homa TP70M 13/4 D Инструкция по эксплуатации
- Homa TP70M 13/4 DA Инструкция по эксплуатации
- Homa TP70M 13/4 (/C) D Инструкция по эксплуатации
- Homa TP70M 16/4 D Инструкция по эксплуатации
- Homa TP70M 16/4 DA Инструкция по эксплуатации
- Homa TP70M 16/4 (/C) D Инструкция по эксплуатации
- Homa TP70M 26/4 D Инструкция по эксплуатации
- Homa TP70M 26/4 DA Инструкция по эксплуатации
- Homa TP70M 26/4 (/C) D Инструкция по эксплуатации
- Homa TP70M 31/4 D Инструкция по эксплуатации
- Homa TP70M 31/4 DA Инструкция по эксплуатации
- Homa TP70M 31/4 (/C) D Инструкция по эксплуатации
- Homa TP70V 16/4 W Инструкция по эксплуатации
- Homa TP70V 16/4 WA Инструкция по эксплуатации
- DEXP SLIM S Инструкция по эксплуатации
- DEXP Pouch Инструкция по эксплуатации