Clarion FZ102E [7/17] Caution
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Clarion FZ102E [7/17] Caution

Clarion FZ102E [7/17] Caution
7
English
FZ102E
Storing radio stations
Storing manually
1. Select a radio band and tune in a desired radio
station.
2. Press longer the [DIRECT] button to store the
station into preset memory.
Note:
Preset memory function can store up to 24 sta-
tions: Six stations for each of FM1, FM2, FM3 and
AM.
Recall a stored station
1. Select the desired band.
2. Press the corresponding [DIRECT] button to
recall the stored station.
About RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
This system can display the name of the broad-
cast station being received (PS) and can auto-
matically switch to the broadcast station with the
best reception as you move long distances (AF
switching).
Also, if a trac announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and interrup-
tion of the station being received with trac infor-
mation from other stations (TP). This function is
not available in some areas.
When using the RDS function, always set the ra-
dio to FM mode.
AF : Alternative Frequency
PS : Programme Service Name
PTY : Programme Type
EON : Enhanced Other Network
TP : Trac Programme
RDS interrupt does not function during AM radio
reception.
When set receives RDS signal, and can read PS
data, PS appears in the display.
For some countries, RDS (Radio Data
System) broadcasting is not supported.
It is recommended to turn o all the RDS
settings.
Radio Mode Operations
Trac announcement (TA)
Setting the TA standby mode
Press the [TA] button during TA indicator o.
Searching for a TP station
Press the [TA] button during TP indicator o.
Note:
TP indicator lit on when a TP station is found.
TA interrupts
In the TA standby mode, when a trac announce-
ment broadcast starts, “TRA INFO” appears in
the display. The trac announcement broadcast
is received as top priority regardless of the func-
tion mode so you can listen to it.
Cancelling an trac announcement
Press the [TA] button during TA interrupts.
Cancelling the TA standby mode
Press the [TA] button during TP and TA indicator
on.
Note:
TA standby mode is also cancelled when [TA]
button is pressed during TP station searching
operation.
Emergency broadcasting
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the emer-
gency broadcast can be heard.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
During a TA, ALARM or PTY interrupt, turn the
[
] rotary knob to set the volume to the
desired level.
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
The factory default setting is “15”.
Other RDS adjustment can be performed in
Adjustment mode. Please refer to “Adjustment
Mode” for further details.
Cancelling an emergency broadcast
Press the [TA] button during interrupts.
Please disable TA standby mode if broad-
casting stations in your country do not
support RDS. Otherwise, you may face
diculties searching for station.
CAUTION
FZ102E_Owner_manual.indb 7 7/24/2012 9:55:18 AM

Содержание

Похожие устройства

Скачать