Tascam MX Connect [12/26] Equalizer tab
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Tascam MX Connect [12/26] Equalizer tab

Tascam MX Connect [12/26] Equalizer tab
TASCAM MX CONNECT
12
2 - TASCAM MX CONNECT
EQUALIZER tab
Use this to increase or decrease the levels of specific frequency
ranges.
This can be used, for example, to enhance the sound of individual
instruments, to adjust the balance of a wide frequency range and
to cut specific unwanted frequencies.
The equalizer has a low shelf for low frequencies, peaking (bell
shape) 1 and 2 for middle frequencies, and a high shelf for high
frequencies.
1 Equalizer ON/OFF button
Use this to turn the equalizer on/off.
The button lights when on and the EQ graph (2) appears
blue.
2 EQ graph
This shows the frequency response with the current equalizer
settings.
The graph is shown even when the equalizer is off.
By tapping L, 1, 2 or H in the EQ graph and then dragging
it, the GAIN and FREQ of that band can be adjusted.
3 Band selection frame
By tapping the L, 1, 2 or H in the EQ graph or above the
GAIN values, you can select that band, showing the selection
frame and enabling adjustment of it is values.
Tap the 6 in the band selection frame to make it disappear.
4 GAIN (L/1/2/H)
Set how much the LOW, 1, 2 and HIGH band levels are ampli-
fied or attenuated.
Range: ±12 dB (default: 0 dB)
Use the
b
and
5
buttons to set the values.
When the LOW CUT button (6) is , the low band gain can-
not be set. The value fields can also be tapped to open setting
value lists.
5 FREQ (L/1/2/H)
These set the cutoff frequencies of the LOW and HIGH bands
and the middle frequencies of the 1 and 2 bands.
Ranges
L: 32 Hz – 1.6 kHz (default: 80 Hz)
1: 32 Hz – 18.0 kHz (default: 300 Hz)
2: 32 Hz – 18.0 kHz (default: 1.2 kHz)
H: 1.7 kHz – 18.0 kHz (default: 5 kHz)
Use the
g
and
t
buttons to set the values.
The value fields
can also be tapped to open setting value lists.
6 LOW CUT button
Tap the LOW CUT button so that appears lit, enabling the
low cut filter that cuts noise and other sounds at low frequen-
cies. (Default: unlit)
7 Q (1/2)
Set the acutenesses of the peaks of the 1 and 2 bands.
The higher the value the more acute it becomes, making it
affect a narrower frequency band. The lower the value, the less
acute it becomes, making it affect a broader frequency band.
Range: 0.25 – 61 (default: 1)
Use the and buttons to set the values.
The value fields can
also be tapped to open setting value lists.

Содержание

Похожие устройства

Скачать