Ecowater eVOLUTION 400 Boost [7/76] Conditioner refiner programming
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ecowater eVOLUTION 400 Boost [7/76] Conditioner refiner programming

Ecowater eVOLUTION 300 Boost [7/76] Conditioner refiner programming
7
SETTING RECHARGE START TIME
Default is 02:00 (2:00 a.m.).
To change it:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Basic settings
screen.
3. Go to Recharge time
screen.
4. Press DOWN (6) or UP
(5) to set the recharge
start time. Hold button to
go faster.
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
MANUALLY RECHARGING
This may be done to assure an adequate supply of
conditioned water at times of unusually high water use.
For example, if you have guests, you could deplete
c
onditioned water capacity before the next automatic
recharge. A manual
recharge will restore 100%
conditioned water capacity
after complete. After long
periods of no water use
(vacations, etc.) it is
recommended to start a
recharge.
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Recharge screen.
3. Go to Recharge Now
and press SELECT (¡)
to begin an immediate
recharge. Recharge
status screen appears
until recharge is
complete, or press LEFT
(3) twice to return to status screens.
Other recharge options:
=Automatic cancels a manually scheduled recharge
(if it has not already begun) and lets the electronic
control determine when to recharge next.
=Schedule sets a recharge to begin at the preset
recharge start time (see below)
SETTING SALT TYPE
Default is NaCl (Sodium
Chloride). Selecting KCl
(Potassium Chloride)
increases fill and brine/slow
rinse times. To change it:
1. Press SELECT (¡) to
go to the Main menu.
2. Go to Salt settings
screen.
3. Go to Salt type screen.
4. Press DOWN (6) or UP
(5) to scroll to the other
salt type.
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
MANUALLY SETTING SALT LEVEL
(Two-Tank Model 600 Power only)
This feature is active only on units without a salt level
s
ensor connected to the electronic controller. Cabinet
models (no separate brine tank) have an internal
s
ensor that automatically measures the level of salt in
the tank. The salt level is displayed on the salt status
rolling screen and is used by the electronic control to
calculate the number of days before empty.
On two-tank Model 600 Power, you must manually
enter the salt level number each time you add salt:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Salt settings
screen.
3. Go to Salt level screen.
4. Add and level salt, then
observe the numbered
scale on the brinewell.
Press UP (5) or DOWN
(6) to match the lowest
number visible above the
salt.
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
Recharge
Salt settings
Basic settings
Main menu
Salt level
Low salt alarm
Salt type
Salt settings
Salt level
4
Automatic
Recharge now
S
chedule
Recharge
Recharge
Salt settings
Basic settings
Main menu
Recharge status
Time left: 118:32
Cycle: Fill
(Right key press advances
cycle)
Hardness
Iron level
Recharge time
Basic settings
Recharge time
02:00
Recharge
Salt settings
Basic settings
Main menu
Sodium (NaCl)
Potassium (KCl)
Salt type
Recharge
Salt settings
Basic settings
Main menu
Low salt alarm
Salt type
Salt settings
Conditioner/Refiner Programming
ECOWATER
S Y S T E M S
English

Содержание

Похожие устройства

Скачать