Elenberg WM-3620D [15/20] Adjusting the leveling feet

Removing the shipping bolts

Before using the washing machine, you must remove all of the ship-

ping bolts:

1. Take the top cover down.

2. Loosen and take the two bolts down from the fasten stand, the

polyfoam interleaf under the stand also be taken out.

3. Instal the cover as before.

4. Keep the shipping bolts and spring block for future shipment

use.

Adjusting the leveling feet

If the oor is uneven, losen the leg bolt by turning it with your hand

until it is at the desired height. Then tighten the locking nut by

turning it with the wrench.

Connecting the water supply hose

1. Take the cold water supply hose and connect to the cold water

supply intake on the back of the machine. Tighten by hand.

2. Connect the other end of the cold water supply hose to water

faucet and tighten it. The proper faucet should be chosen and

its mouth is at.

3. Make sure the connection is good without leaking. No excessive

bending for the water tub by hands.

Connecting the water drain hose

The drain hose should not be placed 80-100cm high above the

oor. The strap and retainer should be applied to protect the oor

from damage due to water leakage.

UNPACKING AND INSTALLATION