Elenberg DW-9205 [32/40] At the end of the wash cycle

Starting a wash cycle.

1. Draw out the lower and upper basket, load the dishes and push

them back. It is commended that loading the lower basket ﬁrst,

then the upper one. The expensive and ﬁner chinaware should not

be put in.

2. With a little force to ensure the door is properly closed.

N0TE: a sound of click could be heard when the door is closed per-

fectly.

3. Insert the plug into the socket.

The power supply is 230V 50HZ, the speciﬁcation of the socket is

250V10A.

4. According to the soil level to choose the desired program by press-

ing program selection button.

5. Press the ON/OFF button

6. Press this button to start automatic washing.

7. Press the ON/OFF button at the end of washing. Open the door of

dishwasher after waiting 30 minutes.

Canceling or modifying a wash cycle setting.

Premise: A cycle that is underway can only be modiﬁed if it has only

been running for a short time. Otherwise, the detergent may have

already been released, and the appliance may have already drained

the wash water. If this is the case, the detergent dispenser must be

reﬁlled (seethe paragraph entitled” Loading the Detergent”).

Change the programm

Press the button (9) to stop washing.

Press the program button to select the

program.

Press the button (9) to start washing.

At the End of the Wash Cycle.

At end of washing, the time display will ﬂash for 8 seconds while

the buzzer sound. But at the end of delayed washing, no sound of

the buzzer, only the ﬂash of the time display.

Forget to Add a Dish?

A forgotten dish can be added anytime before the detergent cup

opens.

1 Pull the door handle.

2 Do not open the door until the water spray action stops. Steam

may rise out of the dishwasher.

3 Add forgotten dishes.

TURNING ON THE APPLIANCE