MPM MWC-02 Инструкция по эксплуатации онлайн [10/28] 463929

DESCRIPTION OF THE DEVICE

1. Protective cover

2. Squeezing cone

3. Separator

4. Holder

5. Pot (600ml)

6. Base

BEFORE A FIRST USE

1. Wash the juice pot and accessories

in warm water with some deter-

gent.

2. Flush the pot and accessories and

dry them.

ASSEMBLY

One base (6) put the juice pot (5) and turn it clockwise. Put the separator (3) on the pot (5). Put

the squeezing cone (2) on the engine’s mandrel and push it. The unit is ready to operate when

the cone clamps are below the edge of the separator’s hole.

DIRECTIONS FOR USE

1. Plug the unit.

2. Half the citruses, put one of them on the squeezing cone and push it. The second hand must

hold the unit.

3. The squeezer will operate automatically. The cone will twist right or left.

4. The direction of twisting can be changed by re-pushing the cone. In this manner the juice is

extracted.

NOTE! In order to change the direction of twisting cone sometimes it is necessary to push it several times. Do

not exceed 2 minutes of constant unit operation time. After the afore-mentioned time has lapsed switch the

unit oﬀ and wait a few minutes before switching it on!

5. Lowering of the pressure on the cone automatically makes the unit switched oﬀ. Remove the

half of a fruit from the cone.

6. After extraction has been completed, remove the squeezing cone and the separator, remove

the pot turning it counterclockwise and pour the juice into glasses

CLEANING AND MAINTENANCE

1. Before you start cleaning, make sure that the device is disconnected from mains.

2. Take out a squeezer’s cone, a strainer, a container for juice and wash them in running water.

After washing, accessories should be thoroughly rinsed and dried up.

3. The case can be cleaned with a wet cloth with detergent. It cannot be submerged into water.