KSB Filtra 30 D [10/36] Transport temporary storage disposal

3 Transport/Temporary Storage/Disposal

10 of 36

Filtra N

3 Transport/Temporary Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer and the insurer about the damage in writing

immediately.

3.2 Transport

CAUTION

Improper pump transport

Damage to the pump!

▷ Never suspend the pump/pump set from the power cable.

▷ Prevent the pump (set) from getting knocked or dropped.

3.3 Storage/preservation

CAUTION

Damage during storage due to frost, humidity, dirt, UV radiation or vermin

Corrosion/contamination of the pump!

▷ Store the pump (set) in a dry, dark, frost-proof room not exposed to sunlight

where the atmospheric humidity is as constant as possible.

Store the pump (set) in a dry, dark, frost-proof room not exposed to sunlight. Under

these conditions it does not need additional preservation.

3.4 Return to supplier

1. Drain the pump as per operating instructions. (ðSection7.3,Page23)

2. Flush and clean the pump, particularly if it has been used for handling noxious,

explosive, hot or other hazardous fluids.

3. If the pump has handled fluids whose residues could lead to corrosion damage

in the presence of atmospheric humidity or could ignite upon contact with

oxygen also neutralise the pump and blow through with anhydrous inert gas to

ensure drying.

4. Always complete and enclose a certificate of decontamination when returning

the pump.

Indicate any safety measures and decontamination measures taken.

(ðSection12,Page34)

NOTE

If required, a blank certificate of decontamination can be the

following web site: www.ksb.com/certificate_of_decontamination