Qtech QSW-2910-28T-AC [166/212] Configure trap sending source address

+7(495) 797-3311 www.qtech.ru

Москва, Новозаводская ул., 18, стр. 1

166

notify sending is trap. After disabling notify sending, trap will not be sent. Notify sending is

defaulted to disable. Configure it in global configuration mode:

snmp-server enable traps [ notificationtype-list ]

no snmp-server enable traps [ notificationtype-list ]

notificationtype-list: Notificationtype list defined by system. To enable or disable specified

notification type by choose one or serval type. If the keyword is vacant, all types of notification

are enabled or disabled.

Notify types are as following:

bridge: Enable/disable STP

interfaces: interface LinkUp/LinkDown

snmp: accessing control; cold boot/heat boot of system

gbnsavecfg: save configuration

rmon: RMON trap

gbn: self-define Trap, such as GN-Link Trap,interface Blocking,CAR, loopback detect

For example:

!Enable notificationtype gbn

QTECH(config)# snmp-server enable traps gbn

13.5.2.7 Configure trap sending source address

Use this command to configure trap sending vlan or supervlan interface belonged to source

address. When configured port contains primary ip,trap sending source address is egress ip.

The default trap sending address is egress ip. Configure it in global configuration mode:

snmp-server trap-source { vlan-interface vlan-id | supervlan-interface supervlan-id }

no snmp-server trap-source

vlan-id or supervlan-id is corresponded vlan or supervlan number belonged to the port of trap

sending address to be configured. vlan-id is in the range of 1-4094 and supervlan-id is in the

range of 1-11.

For example:

!Configure ip whose trap source address is vlan 1

QTECH(config)# snmp-server trap-source vlan-interface 1

13.5.2.8 Configure engine id

This configuration is used to configure local engine-id or recognizable remote engine-id.

Default local engine id is 134640000000000000000000 which cannot be deleted but modified.

It is defaulted to have no recognizable remote engine-id which can be added and deleted.

Once delete a recognizable remote engine the corresponded user can also be deleted. At

most 32 engines can be configured. Use no snmp-server engineID command to restore default