Qtech QSW-8200-52T-AC [27/74] Debug rip

Превью страниц Страница 27 / 74

User Manual

Chapter 3. Commands for RIP 27

www.qtech.ru

 key-string

 key chain

 send-lifetime

3.2 address-family ipv4

 This command is supported by this switch.

3.3 clear ip rip route

 Command: clear ip rip route {<A.B.C.D/M> | kernel | static | connected | rip | ospf | isis

| bgp | all}

 Function: Clear specific route in the RIP route table.

 Parameter: <A.B.C.D/M> Clear the routes which match the destination address from

the RIP route table. Specifies the IP address prefix and its length of the destination

address

 kernel delete kernel routes from the RIP route table

 static delete static routes from the RIP route table

 connected delete direct routes from the RIP route table

 rip only delete RIP routes from the RIP route table

 ospf only delete OSPF routes from the RIP route table

 isis only delete ISIS routes from the RIP route table

 bgp only delete BGP routes from the RIP route table

 all delete all routes from the RIP route table

 Default: No default configurations.

 Command Mode: Admin mode

 Usage Guide: Use this command with the all parameter will delete all learnt route in the

RIP route which will be immediately recovered except for rip route. The dynamic learnt

RIP route can only be recovered by studying one more time.

 Example: Switch# clear ip rip route 10.0.0.0/8

 Switch# clear ip rip route ospf

3.4 debug rip

 Command: debug rip [events| nsm| packet[recv|send][detail]| all]

 no debug rip [events| nsm| packet[recv|send][detail]| all]

 Function: Open various RIP adjustment switches and show various adjustment