Qtech QSW-8200-52T-AC — настройка команд для RIP на маршрутизаторах: руководство пользователя [34/74]

Превью страниц Страница 34 / 74

User Manual

Chapter 3. Commands for RIP 34

www.qtech.ru

 Command Mode: Interface mode

 Usage Guide: After authentication is configured on the cisco router, the RIP packets will

exceeds the length of the defined standard length of the protocol once the number of

route items is greater than 25. By configuring this command the over-lengthen RIP

packets will be receivable other than denied.

 Example: Switch# config terminal

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)# ip rip authentication cisco-compatible

 Related Command: ip rip authentication mode

3.17 ip rip receive-packet

 Command: ip rip receive-packet

 no ip rip receive-packet

 Function: Set the interface to be able to receivable RIP packets; the “no ip rip receive-

packet” command sets the interface to be unable to receivable RIP packets.

 Default: Interface receives RIP packets.

 Command Mode: Interface Configuration Mode.

 Example: Switch# config terminal

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)# ip rip receive-packet

 Related Command: ip rip send-packet

3.18 ip rip receive version

 Command: ip rip receive version { 1 | 2|1 2 }

 no ip rip receive version

 Function: Set the version information of the RIP packets the interface receives. The

default version is 2; the “no ip rip receive version” command restores the value set by

using the version command.

 Parameter: 1 and 2 respectively stands for RIP version 1 and RIP version 2, 1 2 stands for

the RIP versions 1, 2.

 Default: Version 2

 Command Mode: Interface Configuration Mode.

 Example: Switch# config terminal

 Switch(config)# interface vlan 1