Qtech QSW-8200-52T-AC [5/20] Sntp server

User Manual

Chapter 1. Commands for SNTP 5

www.qtech.ru

1.4 sntp server

 Command: sntp server {<ip-address> | <ipv6-address>} [source {vlan <vlan no> |

loopback <loopback no>}] [version <version_no>]

 no sntp server {<ip-address> | <ipv6-address>} [source {vlan <vlan no>

| loopback <loopback no>}] [version <version_no>]

 Function: Enable the specified time server as clock source, the no command deletes the

specified time server.

 Parameters: ip-address: IPv4 address of time server

 ipv6-address: IPv6 address of time server

 source: Specify the interface of the source address

 vlan: Configure the virtual LAN

 vlan no: Virtual LAN number, ranging from 1 to 4094

 loopback: Configure loopback interface

 loopback no: Loopback identifier, ranging from 1 to 1024

 version: Configure the version for the server

 version_no: Version number, ranging from 1 to 4, the default is 4

 Default: Do not configure the time server.

 Command Mode: Global mode

 Usage Guide: None.

 Example:

 Configure the time server address as 1.1.1.1, specify the interface of the source address

as vlan1:

 Switch(config)#sntp server 1.1.1.1 source vlan 1

 Delete the time server that the address is 1.1.1.1, the interface of the specified source

address is vlan1:

 Switch(config)#no sntp server 1.1.1.1 source vlan 1

1.5 show sntp

 Command: show sntp

 Function: Displays current SNTP client configuration and server status.

 Parameters: N/A.

 Command Mode: Admin and Configuration Mode.

 Example: Displaying current SNTP configuration.

 Switch#show sntp

 SNTP server Version Last Receive

 2.1.0.2 1 6