Qtech QSW-8200-52T-AC [6/20] Clock timezone

User Manual

Chapter 2. Commands for NTP 6

www.qtech.ru

Chapter 2 COMMANDS FOR NTP

2.1 clock timezone

 Command: clock timezone WORD {add | subtract} <0-23> [<0-59>]

 no clock timezone WORD

 Function: This command configures timezone in global mode, the no command deletes

the configured timezone.

 Parameters: WORD: timezone name, the length should not exceed 16

 add | subtract: the action of timezone

 <0-23>: the hour value

 <0-59>: the minute value

 Command Mode: Global mode

 Default: None.

 Usage Guide: The timezone name is invalid with the blank, the hour and minute value

must be in the specific range.

 Example: Configure the action as add for the eighth timezone globally.

 Switch(config)#clock timezone aaa add 8

2.2 debug ntp adjust

 Command: debug ntp adjust

 no debug ntp adjust

 Function: To enable/disable the debug switch of displaying local time adjust

information.

 Parameter: None.

 Default: Disabled.

 Command Mode: Admin Mode.

 Usage Guide: None.

 Example: To enable the debug switch of displaying local time adjust information.

 Switch# debug ntp adjust

2.3 debug ntp authentication

 Command: debug ntp authentication

 no debug ntp authentication

 Function: To display NTP authentication information, the no form command disabled

the switch of displaying NTP authentication information.

 Parameter: None.

 Default: Disabled.

 Command Mode: Admin Mode.

 Usage Guide: To display NTP authentication information, if the switch is enabled, and if

the packets schlepped authentication information when the packet in sending or

receiving process, then the key identifier will be printed out.