Qtech QSW-8200-28T-AC Команды для базовой конфигурации онлайн [20/77] 481626

User Manual

Chapter 1. Commands for Basic Switch Configuration 20

www.qtech.ru

 Command mode: All mode.

 Usage Guide: This command is used to monitor the temperature of the switch CPU.

 Example: Display the current temperature of the switch CPU.

 Switch(Config)#show temperature

 Temperature: 47.0625 ℃

 show tech-support

 Command: show tech-support [no-more]

 Function: Display the operational information and the task status of the switch. The

technique specialist use this command to diagnose whether the switch operate

normally.

 Parameter: no-more: Display the operational information and the task status of the

switch directly, do not connect the user by “more”.

 Command mode: Admin and Configuration Mode.

 Usage Guide: This command is used to collect the relative information when the switch

operation is malfunctioned.

 Example:

 Switch#show tech-support

1.1.38 show version

 Command: show version

 Function: Display the version information of the switch.

 Command mode: Admin and Configuration Mode.

 Usage Guide: This command is used to show the version of the switch, it includes the

hardware version and the software version information.

 Example:

 Switch#show version.

1.1.39 username

 Command: username <username> [privilege <privilege>] [password [0 | 7]

<password>]

o no username <username>

 Function: Configure local login username and password along with its privilege level.

 Parameter: <username> is the username, its range should not exceed 32 characters.

<privilege> is the maximum privilege level of the commands that the user is able to

execute, its value is limited between 1 and 15, and 1 by default. <password> is the

password for the user. If input option 0 on password setting, the password is not

encrypted; if input option 7, the password is encrypted (Use 32 bits password

encrypted by MD5).

 Command Mode: Global Mode.