Qtech QSW-8200-28T-AC Команды для базовой конфигурации онлайн [21/77] 481626

User Manual

Chapter 1. Commands for Basic Switch Configuration 21

www.qtech.ru

 Usage Guide: There are two available choices for the preferences of the registered

commands in the switch. They are 1 and 15. Preference of 1 is for the commands of the

normal user configuration mode. Preference of 15 is for the commands registered in

modes other than the normal user configuration modes. 16 local users at most can be

configured through this command, and the maximum length of the password should be

no less than 32.

 Notice: The user can log in user and priority after the command configures, before

issuing the command authentication line console login local, it should be made sure

that at one user has be configured as preference level of 15, in order to login the switch

and make configuration changes in privileged mode and global mode. If there are no

configured local users with preference level of 15, while only Local authentication is

configured for the Console login method, the switch can be login without any

authentication. When using the HTTP method to login the switch, only users with

preference level of 15 can login the switch, users with preference level other than 15

will be denied.

 Example: Configure an administrator account named admin, with the preference level

as 15. And configure two normal accounts with its preference level as 1. Then enable

local authentication method.

 Above all the configurations, only the admin user is able to login the switch in privileged

mode through Telnet or Console login method, user1 and user2 can only login the

switch in normal user mode through the telnet and console login method. For HTTP

user2 will be denied.

 Switch(config)#username admin privilege 15 password 0 admin

 Switch(config)# username user1 privilege 1 password 7

 4a7d1ed414474e4033ac29ccb8653d9b (The password is 32 bits password encrypted by

MD5)

 Switch(config)# username user2 password 0 user2

 Switch(config)# authentication line console login local

1.1.40 web-auth privilege <1-15>

 Command: web-auth privilege <1-15>

 no web-auth privilege

 Function: Configure the level of logging in the switch by web.

 Parameter: <1-15>: Appoint the level of logging in the switch by web and the range is

from 1 to 15.

 Command Mode: Global Mode.

 Default: 15.

 Usage Guide: After configured the level of logging in the switch by web, only the user

with the level that is equal to or higher than it can login in the switch by web.

 Example: Configure the level of logging in the switch by web as 10.

 Switch(config)# web-auth privilege 10