Qtech QSW-8200-28T-AC [22/77] Commands for telnet

User Manual

Chapter 1. Commands for Basic Switch Configuration 22

www.qtech.ru

1.1.41 web language

 Command: web language {chinese | english}

 Function: Set the language for displaying the HTTP Server information.

 Parameter: chinese for Chinese display; english for English display.

 Command mode: Admin Mode

 Default: The default setting is English display.

 Usage Guide: The user can select the language according to their preference.

1.1.42 write

 Command: write

 Function: Save the currently configured parameters to the Flash memory.

 Command mode: Admin Mode.

 Usage Guide: After a set of configuration with desired functions, the setting should be

saved to the specified configuration file, so that the system can revert to the saved

configuration automatically in the case of accidentally powered off or power failure.

This is the equivalent to the copy running-config startup-config command.

1.1.43 write running-config

 Command: write running-config [<startup-config-file-name>]

 Function: Save the current running config as .cfg file to Flash Memory.

 Parameters: <startup-config-file-name> is the full path of the cfg file. The format of

which is as follows:

 The file path comprises of two parts: device prefix used as the root directory (flash:/)

and the file name. No space is allowed in each part or between two parts.

 The suffix of all file names should be .cfg.

 The length of the full file path should not be longer than 128 characters, while the file

name can not be longer than 80 characters.

 Command Mode: Admin Mode.

 Usage Guide: Config file saved by Flash Memory can be used for startup file.

 Example: Save the current running config as .cfg file with name of 123.

 Switch#write running-config 123.cfg

1.2 Commands for Telnet

1.2.1 aaa authorization config-commands

 Command: aaa authorization config-commands

 no aaa authorization config-commands

 Function: Enable command authorization function for the login user with VTY (login

with Telnet and SSH). The no command disables this function. Only enabling this