Qtech QSW-8200-28T-POEAC- DC Команды для dhcp-сервера онлайн [15/79] 481628

User Manual

Chapter 1. Commands for DHCP 15

www.qtech.ru

 Function: Configures WINS servers’ address; the “no netbios-name-server” command

deletes the WINS server.

 Parameters: <address1>…<address8> are IP addresses, in decimal format.

 Default: No WINS server is configured by default.

 Command Mode: DHCP Address Pool Mode

 Usage Guide: This command is used to specify WINS server for the client, up to 8 WINS

server addresses can be configured. The WINS server address assigned first has the

highest priority. Therefore, address 1 has the highest priority, and address 2 the

second, and so on.

 Example: Setting the server address of DHCP pool “1” to 192.168.1.1.

 Switch(dhcp-1-config)#netbios-name-server 192.168.1.1

1.1.24 netbios-node-type

 Command: netbios-node-type {b-node | h-node | m-node | p-node | <type-number>}

 no netbios-node-type

 Function: Sets the node type for the specified port; the “no netbios-node-type”

command cancels the setting.

 Parameters: b-node stands for broadcasting node, h-node for hybrid node that

broadcasts after point-to-point communication; m-node for hybrid node to

communicate in point-to-point after broadcast; p-node for point-to-point node; <type-

number> is the node type in Hex from 0 to FF.

 Default: No client node type is specified by default.

 Command Mode: DHCP Address Pool Mode

 Usage Guide: If client node type is to be specified, it is recommended to set the client

node type to h-node that broadcasts after point-to-point communication.

 Example: Setting the node type for client of pool 1 to broadcasting node.

 Switch(dhcp-1-config)#netbios-node-type b-node

1.1.25 network-address

 Command: network-address <network-number> [<mask> | <prefix-length>]

 no network-address

 Function: Sets the scope for assignment for addresses in the pool; the “no network-

address” command cancels the setting.

 Parameters: <network-number> is the network number; <mask> is the subnet mask in

the decimal format; <prefix-length> stands for mask in prefix form. For example, mask

255.255.255.0 in prefix is “24”, and mask 255.255.255.252 in prefix is “30”. Note: When

using DHCP server, the pool mask should be longer or equal to that of layer 3 interface

IP address in the corresponding segment.

 Default: If no mask is specified, default mask will be assigned according to the address

class.

 Command Mode: DHCP Address Pool Mode