Qtech QSW-8200-28T-POEAC- DC [61/79] Ip dhcp snooping action

User Manual

Chapter 5. Commands for DHCP Snooping 61

www.qtech.ru

 Command Mode: Globe mode.

 Default Settings: DHCP Snooping is disabled by default.

 Usage Guide: When this function is enabled, it will monitor all the DHCP Server packets

of non-trusted ports.

 Example: Enable the DHCP Snooping function.

 switch(config)#ip dhcp snooping enable

5.8 ip dhcp snooping action

 Command: ip dhcp snooping action {shutdown | blackhole} [recovery <second>]

 no ip dhcp snooping action

 Function: Set or delete the automatic defense action of a port.

 Parameters:

 shutdown: When the port detects a fake DHCP Server, it will be

shutdown.

 blackhole: When the port detects a fake DHCP Server, the vid and source

MAC of the fake packet will be used to block the traffic from this MAC.

 recovery: Users can set to recover after the automatic defense action

being executed.(no shut ports or delete correponding blackhole）.

 second: Users can set how long after the execution of defense action to

recover. The unit is second, and valid range is 10-3600.

 Command Mode: Port mode

 Default Settings: No default defense action.

 Usage Guide: Only when DHCP Snooping is globally enabled, can this command be set.

Trusted port will not detect fake DHCP Server, so, will never trigger the corresponding

defense action. When a port turns into a trusted port from a non-trusted port, the

original defense action of the port will be automatically deleted.

 Example: Set the DHCP Snooping defense action of port ethernet1/0/1 as setting

blackhole, and the recovery time is 30 seconds.

 switch(config)#interface ethernet 1/0/1

 switch(Config-Ethernet1/0/1)#ip dhcp snooping action blackhole recovery 30

5.9 ip dhcp snooping action MaxNum

 Command: ip dhcp snooping action {<maxNum>|default}

 Function: Set the number of defense action that can be simultaneously took effect.

 Parameters: <maxNum>: the number of defense action on each port, the range of

which is 1-200, and the value of which is 10 by default.

 default: recover to the default value.

 Command Mode: Globe mode

 Default Settings: The default value is 10.