Qtech QSW-8200-28T-POEAC- DC [30/79] Ipv6 local pool

User Manual

Chapter 2. Commands for DHCPv6 30

www.qtech.ru

 Function: To define an IPv6 general prefix. The no form of this command will delete the

configuration.

 Parameter: <prefix-name> is a character string less than 32 characters, to use as IPv6

general prefix name. <ipv6-prefix/prefix-length> is defined as IPv6 general prefix.

 Command Mode: Global Mode.

 Default: IPv6 general prefix is not configured by default.

 Usage Guide: If IPv6 general prefix is configured, the interface will use the configured

prefix for IPv6 address generating. Commonly, the general prefix is used for enterprise

IPv6 prefix, and when entering an IPv6 address, users can simply add the address suffix

of to the name of the general prefix. The configured address prefix will be reserved in

the general address prefix pool. At most 8 general prefix can be configured at the same

time. When trying to remove a configured general prefix name, the operation will fail if

any interfaces used the configured prefix. Only one general prefix for a prefix name.

The general prefix can not use the same prefix definition with prefixes learnt from

prefix delegation.

 Example: To set the prefix of 2001:da8:221::/48 to general prefix my-prefix.

 Switch(config)# ipv6 general-prefix my-prefix 2001:da8:221::/48

2.18 ipv6 local pool

 Command: ipv6 local pool <poolname> <prefix/prefix-length> <assigned-length>

 no ipv6 local pool <poolname>

 Function: To configure the address pool for prefix delegation. The no form of this

command will remove the IPv6 prefix delegation configuration.

 Parameters: <poolname> is the name for the IPv6 address pool of the prefix

delegation, the length name string should be less than 32. <prefix/prefix-length> is the

address prefix and its length of the prefix delegation. <assigned-length> is the length of

the prefix in the address pool which can be retrieved by the client, the assigned prefix

length should be no less than the value of <prefix-length>

 Command Mode: Global Mode.

 Default: No IPv6 prefix delegation address pool is configured by default.

 Usage Guide: This command should be used with the “prefix delegation pool”

command to allocate address prefixes to the clients. If IPv6 prefix delegation is

removed, the associated “prefix delegation” command will be in-effective either.

2.19 lifetime

 Command: lifetime {<valid-time> | infinity} {<preferred-time> | infinity}

 no lifetime

 Function: To configure the life time for the addresses or the address prefixes allocated

by DHCPv6. The no form of this command will restore the default setting.