Qtech QSW-8200-28T-POEAC- DC Команды для базовой конфигурации онлайн [29/77] 481628

User Manual

Chapter 1. Commands for Basic Switch Configuration 29

www.qtech.ru

 Example: Configure length of characters in each display to 20.

 Switch#terminal length 20

1.2.15 terminal monitor

 Command: terminal monitor

 terminal no monitor

 Function: Copy debugging messages to current display terminal; the “terminal no

monitor” command restores to the default value.

 Command mode: Admin Mode.

 Usage guide: Configures whether the current debugging messages is displayed on this

terminal. If this command is configured on telnet or SSH clients, debug messages will be

sent to that client. The debug message is displayed on console by default.

 Example:

 Switch#terminal monitor

1.2.16 telnet

 Command: telnet [vrf <vrf-name>] {<ip-addr> | <ipv6-addr> | host <hostname>}

[<port>]

 Function: Login on the remote host by Telnet

 Parameter: <vrf-name> is the specific VRF name; <ip-addr> is the IP address of the

remote host, shown in dotted decimal notation; <ipv6-addr> is the IPv6 address of the

remote host; <hostname> is the name of the remote host, containing max 64

characters; <port> is the port number, ranging between 0 and 65535.

 Command Mode: Admin Mode.

 Usage Guide: This command is used when the switch is applied as Telnet client, for

logging on remote host to configure. When a switch is applied as a Telnet client, it can

only establish one TCP connection with the remote host. To connect to another remote

host, the current TCP connection must be disconnected with a hotkey “CTRL+ \”. To

telnet a host name, mapping relationship between the host name and the IP/IPv6

address should be previously configured. For required commands please refer to ip

host and ipv6 host. In case a host corresponds to both an IPv4 and an IPv6 addresses,

the IPv6 should be preferred when telneting this host name.

 Example: The switch telnets to a remote host whose IP address is 20.1.1.1.

 Switch#telnet 20.1.1.1 23

 Connecting Host 20.1.1.1 Port 23...

 Service port is 23

 Connected to 20.1.1.1

 login:123

 password:***

 router>

1.2.17 telnet server enable