Qtech QSW-8200-28T-POEAC- DC [64/77] Format

User Manual

Chapter 2. File System Commands 64

www.qtech.ru

 startup-config 2,064 1980-01-01 00:30:12 ----

 Total 7, 932, 928 byte(s) in 4 file(s)， free 4, 966, 400 byte(s)

 Switch#

2.5 format

 Command: format <device>

 Function: Format the storage device.

 Parameters: <device> is the name of the device to be formatted.

 Command Mode: Admin Mode.

 Default Settings: None.

 Usage Guide:

 After formatting, all files on the storage device will be irrecoverably lost.

 The only acceptable file system type of Format is FAT 32, without exception.

 This command cannot be used to format flash.

2.6 mkdir

 Command: mkdir <directory>

 Function: Create a sub-directory in the designated directory on a certain storage device

 Parameters: <directory> is the sub-directory name, a sequence of consecutive

characters, whose length ranges from 1 to 80.

 Command Mode: Admin Mode.

 Default Settings: None.

 Usage Guide: The new created directory should not be named the same as any other

directory or file in the designated directory, or located on a flash device. If any error

occurs, a prompt will be displayed.

2.7 mount

 This command is not supported by the switch.

2.8 pwd

 Command: pwd

 Function: Display the current working directory.

 Parameters: None.

 Command Mode: Admin Mode.

 Default Settings: The default directory is flash.

 Example: Display the current working directory.