Qtech QSW-8200-28T-POEAC- DC Команды для базовой конфигурации онлайн [43/77] 481628

User Manual

Chapter 1. Commands for Basic Switch Configuration 43

www.qtech.ru

 Function: Enable the SNMP proxy server function on the switch. The “no snmp-server

enable” command disables the SNMP proxy server function

 Command mode: Global mode

 Default: SNMP proxy server function is disabled by system default.

 Usage guide: To perform configuration management on the switch with network

manage software, the SNMP proxy server function has to be enabled with this

command.

 Example: Enable the SNMP proxy server function on the switch.

 Switch(config)#snmp-server enable

1.4.14 snmp-server enable traps

 Command: snmp-server enable traps

 no snmp-server enable traps

 Function: Enable the switch to send Trap message; the “no snmp-server enable traps”

command disables the switch to send Trap message.

 Command mode: Global Mode

 Default: Forbid to send Trap message.

 Usage Guide: When Trap message is enabled, if Down/Up in device ports or of system

occurs, the device will send Trap messages to NMS that receives Trap messages.

 Example:

 Enable to send Trap messages.

 Switch(config)#snmp-server enable traps

 Disable to send Trap messages.

 Switch(config)#no snmp-server enable traps

1.4.15 snmp-server engineid

 Command: snmp-server engineid <engine-string>

 no snmp-server engineid

 Function: Configure the engine ID; the “no" form of this command restores to the

default engine ID.

 Command Mode: Global mode

 Parameter: <engine-string> is the engine ID shown in 1-32 digit hex characters.

 Default: Default value is the company ID plus local MAC address.

 Usage Guide: None

 Example: Set current engine ID to A66688999F

 Switch(config)#snmp-server engineid A66688999F

 Restore the default engine ID

 Switch(config)#no snmp-server engineid

1.4.16 snmp-server group