Qtech QSW-8200-28T-POEAC- DC Команды для базовой конфигурации онлайн [52/77] 481628

User Manual

Chapter 1. Commands for Basic Switch Configuration 52

www.qtech.ru

 Relative command: ip ftp

1.5.5 ftp-server timeout

 Command: ftp-server timeout <seconds>

 Function: Set data connection idle time.

 Parameter: <seconds> is the idle time threshold (in seconds) for FTP connection, the

valid range is 5 to 3600.

 Default: The system default is 600 seconds.

 Command mode: Global Mode

 Usage Guide: When FTP data connection idle time exceeds this limit, the FTP

management connection will be disconnected.

 Example: Modify the idle threshold to 100 seconds.

 Switch#config

 Switch(config)#ftp-server timeout 100

1.5.6 ip ftp

 Command: ip ftp username <username> password [0 | 7] <password>

 no ip ftp username <username>

 Function: Configure the username and password for logging in to the FTP; the no

operation of this command will delete the configured username and password

simultaneously.

 Parameters: <username> is the username of the FTP link, its range should not exceed

32 characters; <password> is the password of the FTP link, if input option 0 on

password setting, the password is not encrypted; if input option 7, the password is

encrypted.

 Default Settings: The system uses anonymous FTP links by default.

 Command Mode: Global Configuration Mode.

 Examples: Configure the username as Switch and the password as superuser.

 Switch#

 Switch#config

 Switch(config)#ip ftp username Switch password 0 superuser

 Switch(config)#

1.5.7 show ftp

 Command: show ftp

 Function: Display the parameter settings for the FTP server.

 Command mode: Admin and Configuration Mode.

 Default: Do not display.

 Example:

 Switch#show ftp

 Timeout : 600