Qtech QSW-8200-28T-POEAC- DC Команды для базовой конфигурации онлайн [60/77] 481628

User Manual

Chapter 1. Commands for Basic Switch Configuration 60

www.qtech.ru

 Server IP Address: [10.1.1.2] 192.168.1.2

1.6.16 show

 Command: show [board|config|boot-files|partition]

 Function: Show the configuration of the corresponding switch.

 Parameters: board is the parameter information of switch, such as type, mac, sn and

etc. config is the configuration parameter of the current bootrom; boot-files is the

configuration parameter of first /second img files and cfg files; partition is the partition

of flash.

 Default: None.

 Command mode: Boot Mode.

 Usage Guide: show board is used to show the parameters information of switch, such

as type, mac, sn and etc. Show config is used to show the configuration parameter of

bootrom; show boot-files is used to show the configuration parameter of first /second

img files and cfg files; show partition is used to show the partition of flash.

 Example: Show the configuration of first img files.

 [Boot]: show boot-files

 The primary img file : flash:/1.img

 The backup img file : flash:/nos.img

1.6.17 showconfig

 Command: showconfig

 Function: Show the configuration parameter of bootrom, this command is the same as

show config command.

 Parameters: None.

 Default: None.

 Command mode: Boot Mode.

 Usage Guide: Show the user configuration of bootrom.

 Example: Show the configuration parameter of bootrom.

 [Boot]: showconfig

 Host IP Address: 192.168.1.1

 Server IP Address: 192.168.1.2

1.6.18 write

Command: write <filename>

 Function: Write the file which was downloaded before into the memory such as flash.

 Parameters: <filename> is the name of the file which will be written into the memory.

 Default: None.

 Command mode: Boot Mode.

 Usage Guide: Write the file which was downloaded before into the flash or bootrom.

 Example: Write the IMG file in the flash and name it as nos.img.