Qtech QSW-8200-28T-POEAC- DC Команды для протокола многоадресной рассылки онлайн [16/39] 481628

User Manual

Chapter 1. IPv4 Multicast Protocol 16

www.qtech.ru

 Command：ip igmp snooping vlan <1-4094> interface (ethernet | port-channel|)

IFNAME limit {group <1-65535>| source <1-65535>} strategy (replace | drop)

 no ip igmp snooping vlan <1-4094> interface (ethernet | port-channel|) IFNAME limit

group source strategy

 Function：Configure the number of groups which are allowed joining and the

maximum of the source in each group under the IGMP Snooping port. Configure the

strategy when it is up to the upper limit, including “replace” and “drop”.

 Parameters：vlan-id: VLAN ID range is <1-4094>

 ehternet：Ethernet port name

o ifname：Interface name

o port-channel: ports aggregation

o <1-65535>：The maximum number of groups allowed joining

o <1-65535>：The maximum number of source table entries in each group,

including include source and exclude source.

 replace：Replace the group and source information

 drop：Drop the new group and source information

 Command mode: Global Mode.

 Default: There is no limitation as default.

 Usage Guide: When the number of the groups joined under the port or the number of

sources in this group exceeds the limit, it will be dealt according to the configured

strategy. If it is drop, drop the new group and source information; if it is replace, find a

dynamic group and source from the port to conduct deleting and replacing, and then

add the new group and source information. The premise of using this command is that

this VLAN is enabled IGMP Snooping function. No command configures as “no

limitation”.

 Example：

 Switch(config)#ip igmp snooping vlan 2 interface ethernet 1/0/11 limit group 300

source 200 strategy replace

 Switch(config)#

1.2.13 ip igmp snooping vlan mrouter-port interface

 Command: ip igmp snooping vlan <vlan-id> mrouter-port interface[<ehternet> |

<port-channel>] <ifname>

o no ip igmp snooping vlan <vlan-id> mrouter-port interface[<ehternet> | <port-

channel>] <ifname>

 Function: Configure static mrouter port of VLAN. The no form of the command cancels

this configuration.

 Parameter: vlan-id: ranging between <1-4094>

 ehternet: Name of Ethernet port

 ifname: Name of interface

 port-channel: Port aggregation

 Command Mode: Global mode