Qtech QSW-8200-28T-POEAC- DC Команды для протокола многоадресной рассылки онлайн [18/39] 481628

User Manual

Chapter 1. IPv4 Multicast Protocol 18

www.qtech.ru

 Default: 125s

 Usage Guide: It is recommended to use the default settings. Please keep this configure

in accordance with IGMP configuration as possible if layer 3 IGMP is running.

 Example: Switch(config)#ip igmp snooping vlan 2 query-interval 130

1.2.17 ip igmp snooping vlan query-mrsp

 Command: ip igmp snooping vlan <vlan-id> query-mrsp <value>

 no ip igmp snooping vlan <vlan-id> query-mrsp

 Function: Configure the maximum query response period. The “no ip igmp snooping

vlan <vlan-id> query-mrsp” command restores to the default value.

 Parameter: vlan-id: VLAN ID, ranging between <1-4094>

 value: ranging between <1-25> seconds

 Command Mode: Global mode

 Default: 10s

 Usage Guide: It is recommended to use the default settings. Please keep this configure

in accordance with IGMP configuration as possible if layer 3 IGMP is running.

 Example:

 Switch(config)#ip igmp snooping vlan 2 query-mrsp 18

1.2.18 ip igmp snooping vlan query-robustness

 Command: ip igmp snooping vlan <vlan-id> query-robustness <value>

 no ip igmp snooping vlan <vlan-id> query-robustness

 Function: Configure the query robustness. The “no ip igmp snooping vlan <vlan-id>

query-robustness” command restores to the default value.

 Parameter: vlan-id: VLAN ID, ranging between <1-4094>

 value: ranging between <2-10>

 Command Mode: Global mode

 Default: 2

 Usage Guide: It is recommended to use the default settings. Please keep this configure

in accordance with IGMP configuration as possible if layer 3 IGMP is running.

 Example:

 Switch(config)#ip igmp snooping vlan 2 query- robustness 3

1.2.19 ip igmp snooping vlan report source-address

 Command: ip igmp snooping vlan <vlan-id> report source-address <A.B.C.D>

 no ip igmp snooping vlan <vlan-id> report source-address

 Function: Configure forward report source-address for IGMP, the “no ip igmp snooping

vlan <vlan-id> report source-address” command restores the default setting.

 Parameter: vlan-id: VLAN ID range<1-4094>;

 A.B.C.D: IP address, can be 0.0.0.0.

 Command Mode: Global Mode.