Kohler Courage SV740 [31/84] Lubrication system

31

Lubrication System

32 690 01 Rev. H KohlerEngines.com

OIL RECOMMENDATIONS

Refer to Maintenance.

CHECK OIL LEVEL

NOTE: To prevent extensive engine wear or damage,

never run engine with oil level below or above

operating range indicator on dipstick.

Ensure engine is cool. Clean oil fi ll/dipstick areas of any

thread on completely.

2. Remove dipstick; check oil level. Level should be at

top of indicator on dipstick.

3. If oil is low on indicator, add oil up to top of indicator

mark.

4. Reinstall and secure dipstick.

CHANGE OIL AND FILTER

Change oil while engine is warm.

1. Clean area around oil fi ll cap/dipstick. Remove drain

plug and oil fi ll cap/dipstick. Allow oil to drain

completely.

2. Clean area around oil fi lter. Place a container under

4. Apply a thin fi lm of clean oil to rubber gasket on new

fi lter.

5. Refer to instructions on oil fi lter for proper

installation.

6. Fill crankcase with new oil. Level should be at top of

indicator on dipstick.

7. Reinstall oil fi ll cap/dipstick and tighten securely.

8. Start engine; check for oil leaks. Stop engine; correct

leaks. Recheck oil level.

9. Dispose of used oil and fi lter in accordance with

This engine uses a combination pressure/splash lubrication system, delivering oil under pressure to crankshaft,

connecting rod and main bearing surfaces. Other component areas are splash lubricated.

A high-effi ciency gerotor oil pump maintains high oil fl ow and oil pressure, even at low speeds and high operating

temperatures. A pressure relief valve limits maximum pressure of system. Oil pan must be removed to service oil

pickup and oil pump.

Lubrication Components