Kohler Command PRO CV752 [20/68] Air cleaner intake

24 690 37 Rev. DKohlerEngines.com20

Air Cleaner/Intake

AIR CLEANER

These systems are CARB/EPA certiﬁ ed and components

should not be altered or modiﬁ ed in any way.

Air Cleaner Components

1. Unhook retaining clips and remove end cap(s).

2. Check and clean inlet screen (if equipped).

3. Pull air cleaner element out of housing and replace.

Check condition of inner element; replace when dirty.

4. Check all parts for wear, cracks, or damage, and that

ejector area is clean.

5. Install new element(s).

6. Reinstall end cap(s) with dust ejector valve/screen

down; secure with retaining clips.

BREATHER TUBE

Ensure both ends of breather tube are properly

connected.

AIR COOLING

WARNING

Hot Parts can cause severe burns.

Do not touch engine while operating or just

after stopping.

Never operate engine with heat shields or guards

removed.

Proper cooling is essential. To prevent over heating,

clean screens, cooling ﬁ ns, and other external surfaces

of engine. Avoid spraying water at wiring harness or any

electrical components. Refer to Maintenance Schedule.

NOTE: Operating engine with loose or damaged air

cleaner components could cause premature

wear and failure. Replace all bent or damaged

components.

NOTE: Paper element cannot be blown out with

compressed air.

A Air Cleaner Housing B End Cap

C Element D Inner Element

E Ejector Area F Inlet Screen

G Retaining Clip H

Filter Minder (Optional)

or Plug