![Lowara 10SV 06K022 1015L120C [20/72] Erp 2009 125 ec](/img/pdf.png)
Lowara 10SV 06K022 1015L120C [20/72] Erp 2009 125 ec
![Lowara 10SV 05K022 1015L119C [20/72] Erp 2009 125 ec](/views2/1608160/page20/bg14.png)
20
e-SV™ SERIES
PUMPS
With the “Energy using Products” (EuP 2005/32/EC) and “Energy related Products” (ErP 2009/125/EC) directives,
the European Commission has established requirements for promoting the use of products with low power
consumption.
Among the various products considered there are also some typologies of pumps with the characteristics defined by
the specific Regulation (EU) n. 547/2012 implementing the requirements of Directives EuP and ErP.
For vertical multi-stage pumps (MS-V for the Regulations), the efficiency evaluation refers to:
• just the pump and not the pump and motor assembly (electric or combustion);
• pumps with a nominal pressure PN not higher than 25 bar (2500 kPa);
• pumps designed to operate at a speed of 2900 min-
1
(for electric pumps this means 50 Hz 2-pole electric
motors);
• pumps with a maximum flow of 100 m
3
/h;
• use with clean water at a temperature ranging from -10°C to 120°C (the test is performed with cold water at a
temperature not higher than 40°C).
The Regulation also establishes the following deadlines:
Regulation (EU) n. 547/2012 – Annex II – point 2 (Product information requirements)
1) Minimum efficiency index: see the MEI column in the tables in the Hydraulic performance section.
2) “The benchmark for most efficient water pumps is MEI ≥ 0,70”.
3) Year of manufacture: from January 2013.
4) Manufacturer: Lowara srl Unipersonale - Reg. No. 03471820260 - Montecchio Maggiore, Vicenza, Italy.
5) Product type: see the PUMP TYPE column in the tables in the Hydraulic performance section.
6) Hydraulic pump efficiency with trimmed impeller: not applicable to these products.
7) Pump performance curves, including the performance curve: see the Operating Characteristics graphs in the
following pages.
8) “The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller
diameter. The trimming of the impeller will adapt the pump to a fixed duty point, leading to reduced energy
consumption. The minimum efficiency index (MEI) is based on the full impeller diameter”.
9) “The operation of this water pump with variable duty points may be more efficient and economic when
controlled, for example, by the use of a variable speed drive that matches the pump duty to the system”.
10) Information relevant for disassembly, recycling or disposal at end-of-life: observe the current laws and by-laws
governing sorted waste disposal. Consult the product operating manual.
11) “Designed for use below – 10 °C only”: note not applicable to these products.
12) “Designed for use above 120 °C only”: note not applicable to these products.
13) Specific instructions for pumps as per points 11 and 12: not applicable to these products.
14) “Information on benchmark efficiency is available at”: www.europump.org (Ecodesign section).
15) The benchmark efficiency graphs with MEI = 0.7 and MEI = 0.4 are available at
www.europump.org/efficiencycharts or http://europump.net/uploads/Fingerprints.pdf
(refer to “Multistage Vertical 2900 rpm”).
ErP 2009/125/EC
from minimum efficiency index (MEI)
1
st
January 2013 MEI ≥ 0,1
1
st
January 2015 MEI ≥ 0,4
Содержание
- Enntech 1
- E sv series hydraulic performance range at 50 hz 2
- Lowara e sv hydrovar xylect are trademarks of xylem inc or one of its subsidiaries all other trademarks of registered trademarks are property of their respective owners 2
- Contents 3
- Applications 5
- Arket sectors 5
- Boiler feed 5
- Circulation of hot and cold water for heating cooling and conditioning systems 5
- E sv series 5
- Handling of moderately aggressive liquids demineralised water water and glycol etc 5
- Handling of water free of suspended solids in the civil industrial and agricultural sectors 5
- I alert 5
- Irrigation systems 5
- Pharmaceutical food beverage industries 5
- Pressure boosting and water supply systems 5
- Specifications pump 5
- Vertical multistage electric pumps 5
- Wash systems 5
- Water treatment plants 5
- Available on request 6
- Characteristics of 1 3 5 10 15 22sv series 6
- Characteristics of 33 46 66 92 125sv series 6
- 3 5 10 15 22sv versions 7
- 46 66 92 125sv versions 7
- Available for p versions see specific catalogue 7
- Caratteristiche generali 1 3 5 10 15 22 33 46 66 92 125 sv 2 poli 50 hz 7
- General characteristics 2 pole sv 7
- Version diagram 7
- Versioni 1 22sv 7
- Versioni 33 46 66 92 125sv 7
- 3 5 10 15 22sv series 8
- 46 66 92 125sv series 8
- Example 125sv8 2ag550t sv series electric pump flow rate 125 8
- Example 22sv10f110t sv series electric pump flow rate 22 8
- F 10 sv 8
- H number of impellers 10 f version aisi 304 round flanges rated motor power 11 kw 50 hz frequency three phase 8
- H number of impellers 8 2 of which with a smaller external diameter type a g version aisi 304 cast iron round flanges rated motor power 55 kw 50 hz frequency three phase 8
- Identification code 8
- L 110 t 8
- L 550 t 8
- 22sv electric pump 33 125sv electric pump 9
- 22sv pump 33 125sv pump 9
- Legend 9
- Rating plate 9
- 3 5sv series and 10 15 22sv series 10
- F t r versions 10
- Kw electric pump cross section and main components 10
- Materiali 1 22 sv versioni f t r 10
- Materiali 1 22sv versioni n v c k 10
- N v c k versions 10
- 15 22sv series 11
- 5 kw electric pump cross section and main components 11
- F t r versions 11
- Materiali 10 22 sv versioni f t r 11
- Materiali 10 22sv versioni n v c k 11
- N v c k versions 11
- 46 66 92sv series electric pump cross section and main components 12
- G versions 12
- Materiali 33 92sv versioni g 12
- Materiali 33 92sv versioni n 12
- N versions 12
- G versions 13
- Materiali 125 sv versioni g 13
- Materiali 125sv versioni n 13
- N versions 13
- Sv series electric pump cross section and main components 13
- 15 22sv 4 kw 10 15 22sv 5 5 kw 33 46 66 92 125sv 14
- E sv series mechanical seals according to en 12756 14
- List of materials 14
- Pressure temperature application limits for complete pump applicable with any of the seals listed above 14
- Type of seal 14
- Compatibility chart for materials in contact with most commonly used liquids 15
- Tabella di compatibilita dei materiali a contatto con i principali liquidi 15
- E sv series motors 16
- Erp 2009 125 ec 16
- Motori monofase per serie 1 22 sv 50 hz 2 poli 16
- Single phase motors at 50 hz 2 pole 16
- E sv series three phase motors at 50 hz 2 pole up to 22 kw 17
- Motori trifase per serie 1 125 sv 50 hz 2 poli fino a 22 kw motori trifase per serie 1 125 sv 50 hz 2 poli fino a 22 kw motori trifase per serie 1 125 sv 50 hz 2 poli fino a 22 kw motori trifase per serie 1 125 sv 50 hz 2 poli fino a 22 kw 17
- E sv series three phase motors at 50 hz 2 pole from 30 to 55 kw 18
- Motor noise 2 pole motors 18
- Motori trifase per serie 1 125 sv 50 hz 2 poli da 30kw fino a 55kw motori trifase per serie 1 125 sv 50 hz 2 poli da 30kw fino a 55kw motori trifase per serie 1 125 sv 50 hz 2 poli da 30kw fino a 55kw motori trifase per serie 1 125 sv 50 hz 2 poli da 30kw fino a 55kw 18
- Rumorosita motori sv 2 poli 50hz 18
- Available voltages sm and plm motors for e sv series 2 pole 19
- Surface motors standard tensions offering 19
- Surface motors standard voltages offering motori di superficie specchietto tensioni disponibile 19
- W22 motors for e sv series 2 pole 19
- E sv series pumps 20
- Erp 2009 125 ec 20
- Background and context 21
- Benefits of e svh with hydrova 21
- E sv series version with hydrova 21
- Identification code 21
- Special configurations 21
- Special features benefits 21
- E sv series version with hydrova 22
- Lowara 22
- Operating principle 22
- Typical example of energy savings 22
- Heating ventilation and air conditioning hvac 23
- Irrigation and agriculture 23
- Light industry 23
- Pharmaceutical and food beverage industries 23
- Typical applications of e sv series electric pumps 23
- Water supply and pressure boosting 23
- Water treatment 23
- 2900 rpm e sv 24
- E sv series hydraulic performance range at 50 hz 2 poles 24
- Iso 9906 2012 grade 3b 24
- 3 5sv series hydraulic performance table at 50 hz 2 poles 25
- Tabella di prestazioni idrauliche serie 1sv 3sv 5sv 2p 50 hz 25
- 15 22sv series hydraulic performance table at 50 hz 2 poles 26
- Tabella di prestazioni idrauliche serie 10sv 15sv 22sv 2p 50 hz 26
- 46sv series hydraulic performance table at 50 hz 2 poles 27
- Tabella di prestazioni idrauliche serie sv33 46 2 poli 50 hz 27
- 92sv series hydraulic performance table at 50 hz 2 poles 28
- Tabella di prestazioni idrauliche serie 66 92sv 2 poli 50 hz 28
- Sv series hydraulic performance table at 50 hz 2 poles 29
- Tabella di prestazioni idrauliche serie 125sv 2p 50 hz 29
- Dimensioni e pesi serie 1sv 2 poli 50 hz 30
- Sv series 2 to 15 stages dimensions and weights at 50 hz 2 poles 30
- 2900 rpm 31
- Iso 9906 2012 grade 3b 31
- Sv series 2 to 15 stages operating characteristics at 50 hz 2 poles 31
- Dimensioni e pesi serie 1sv 2 poli 50 hz 32
- Sv series 17 to 37 stages dimensions and weights at 50 hz 2 poles 32
- 2900 rpm 33
- Iso 9906 2012 grade 3b 33
- Sv series 17 to 37 stages operating characteristics at 50 hz 2 poles 33
- Dimensioni e pesi serie 3sv 2 poli 50 hz 34
- Sv series dimensions and weights at 50 hz 2 poles 34
- 2900 rpm 35
- Iso 9906 2012 grade 3b 35
- Sv series operating characteristics at 50 hz 2 poles 35
- Dimensioni e pesi serie 5sv 2 poli 50 hz 36
- Sv series dimensions and weights at 50 hz 2 poles 36
- 2900 rpm 37
- Iso 9906 2012 grade 3b 37
- Sv series operating characteristics at 50 hz 2 poles 37
- Dimensioni e pesi serie 10sv 2 poli 50 hz 38
- Sv series dimensions and weights at 50 hz 2 poles 38
- 2900 rpm 39
- Iso 9906 2012 grade 3b 39
- Sv series operating characteristics at 50 hz 2 poles 39
- Dimensioni e pesi serie 15sv 2 poli 50 hz 40
- Sv series dimensions and weights at 50 hz 2 poles 40
- 2900 rpm 41
- Iso 9906 2012 grade 3b 41
- Sv series operating characteristics at 50 hz 2 poles 41
- Dimensioni e pesi serie 22sv 2 poli 50 hz 42
- Sv series dimensions and weights at 50 hz 2 poles 42
- 2900 rpm 43
- Iso 9906 2012 grade 3b 43
- Sv series operating characteristics at 50 hz 2 poles 43
- Dimensioni e pesi serie 33sv 2 poli 50 hz 44
- Sv series dimensions and weights at 50 hz 2 poles 44
- 2900 rpm 45
- Iso 9906 2012 grade 3b 45
- Iso 9906 2012 grade 3b 2900 rpm 45
- Sv series operating characteristics at 50 hz 2 poles 45
- Dimensioni e pesi serie 46sv 2 poli 50 hz 46
- Sv series dimensions and weights at 50 hz 2 poles 46
- 2900 rpm 47
- Iso 9906 2012 grade 3b 47
- Iso 9906 2012 grade 3b 2900 rpm 47
- Sv series operating characteristics at 50 hz 2 poles 47
- Dimensioni e pesi serie 66sv 2 poli 50 hz 48
- Sv series dimensions and weights at 50 hz 2 poles 48
- 2900 rpm 49
- Iso 9906 2012 grade 3b 49
- Sv series operating characteristics at 50 hz 2 poles 49
- Dimensioni e pesi serie 92sv 2 poli 50 hz 50
- Sv series dimensions and weights at 50 hz 2 poles 50
- 2900 rpm 51
- Iso 9906 2012 grade 3b 51
- Sv series operating characteristics at 50 hz 2 poles 51
- Dimensioni e pesi serie 125sv 2 poli 50 hz 52
- Sv series dimensions and weights at 50 hz 2 poles 52
- 2900 rpm 53
- Iso 9906 2012 grade 3b 53
- Sv series operating characteristics at 50 hz 2 poles 53
- Accessories 55
- Sensors 55
- Available in two power versions depending on foreseen use 56
- Codice sol_m0005_a_sc 56
- Data 26 novembre 2012 56
- Disegnatore m caldarde 56
- General operating features 56
- Modello sensore ottico di livello 56
- Note deriva dasol_m0004_a_sc 56
- Operating principle 56
- Protection sensor against dry running 56
- Revisione a 56
- Sensor for detecting the presence of water based on the optoelectronic principle therefore non invasive and with no moving parts the sensor features an electronic contact on off which stops the pump if there is no water in the seal area the sensor opens the electric contact if there is no water after they factory set delay 10 seconds elapses the sensor is supplied as a kit complete with 2 metres of cable an epdm o ring gasket and a stainless steel adapter 56
- Specifications 56
- Pumps for the 33 46 66 92 125sv series the 3 8 x 1 2 adaptor ring included in the kit must also be mounted 57
- Sensor kit drp gp sensor kit drp gp code 109394610 57
- Sensor kit drp hv sensor kit drp hv code 109394600 57
- The sensor can be directly mounted on the filling plug of the e s 57
- Wiring diagram 57
- I aler 58
- Serie e s 58
- Specifications 58
- Vibration monitor 58
- I aler 59
- Serie e s 59
- Vibration monitoring 59
- 3sv 25 rp 1 85 10 115 16 14 4 25 5sv 32 rp 1¼ 100 13 140 16 18 4 25 10sv 40 rp 1½ 110 14 150 19 18 4 25 15 22sv 50 rp 2 125 16 165 24 18 4 25 33sv 65 rp 2½ 145 16 185 23 18 4 16 46sv 80 rp 3 160 17 200 27 18 8 16 66sv 92sv 100 rp 4 180 18 220 31 18 8 16 60
- According to en 1092 1 60
- Counterflange 60
- Dimensioni controflange ovali per 1 2 60
- Dimensions of oval counterflanges sv t 60
- Dimensions of round threaded counterflanges sv f n r g 60
- Dimensions of weld on round 60
- Sv g n according to en 1092 1 60
- Couplings sv v 61
- Dimensioni giunti clamp 1 22 sv 61
- Dimensioni giunti victaulic sv2 61
- Dimensions of clamp couplings sv c 61
- Dimensions of victauli 61
- Special versions on request 62
- Technical appendix 64
- Technical appendix 65
- Tensione di vapore tabella tensione di vapore ps e densita ρ dell acqua 65
- Vapour pressure vapour pressure ps and ρ density of water table 65
- Tabella perdite di carico per 100 m tubazione diritta in ghisa formula hazen williams c 100 66
- Table of flow resistance in 100 m of straight cast iron pipeline hazen williams formula c 100 66
- Technical appendix 66
- Flow resistance table of flow resistance in bends valves and gates 67
- Tabella lunghezza di tubazione equivalente 67
- Technical appendix 67
- The flow resistance is calculated using the equivalent pipeline length method according to the table below 67
- The table is valid for the hazen williams coefficient c 100 cast iron pipework for steel pipework multiply the values by 1 41 for stainless steel copper and coated cast iron pipework multiply the values by 1 85 when the equivalent pipeline length has been determined the flow resistance is obtained from the table of flow resistance the values given are guideline values which are bound to vary slightly according to the model especially for gate valves and non return valves for which it is a good idea to check the values supplied by manufacturers 67
- Length 68
- Pressure and head 68
- Technical appendix 68
- Temperature 68
- Volume 68
- Volumetric capacity 68
- Further product selection and documentation xylec 69
- Technical appendix 69
- Further product selection and documentation xylec 70
- Technical appendix 70
- Enntech 72
Похожие устройства
- Lowara 10SV 06N022 1015L1204 Инструкция по эксплуатации
- Lowara 10SV 06N022 1015L1204 Технические данные
- Lowara 10SV 06R022 1015L1203 Инструкция по эксплуатации
- Lowara 10SV 06R022 1015L1203 Технические данные
- Lowara 10SV 06T022 1015L1200 Инструкция по эксплуатации
- Lowara 10SV 06T022 1015L1200 Технические данные
- Lowara 10SV 06V022 1015L1205 Инструкция по эксплуатации
- Lowara 10SV 06V022 1015L1205 Технические данные
- Lowara 10SV 07C030 1015L121B Инструкция по эксплуатации
- Lowara 10SV 07C030 1015L121B Технические данные
- Lowara 10SV 07F030 1015L1211 Инструкция по эксплуатации
- Lowara 10SV 07F030 1015L1211 Технические данные
- Lowara 10SV 07K030 1015L121C Инструкция по эксплуатации
- Lowara 10SV 07K030 1015L121C Технические данные
- Lowara 10SV 07N030 1015L1214 Инструкция по эксплуатации
- Lowara 10SV 07N030 1015L1214 Технические данные
- Lowara 10SV 07R030 1015L1213 Инструкция по эксплуатации
- Lowara 10SV 07R030 1015L1213 Технические данные
- Lowara 10SV 07T030 1015L1210 Инструкция по эксплуатации
- Lowara 10SV 07T030 1015L1210 Технические данные