Oregon Scientific BAR339DP [4/10] Remote sensor installation

E N

• Plug AC/DC adaptor into socket. Make sure the

adapter is not obstructed and is easily accessible

to the unit.

To completely disconnect from power, the adapter

should be disconnected from the main unit.

NOTE The main unit and adapter should not be

exposed to wet conditions. No objects ﬁlled with liquid,

such as vases, should be placed on the main unit and

adapter.

Memory backup:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the polarities.

NOTE Batteries should not be exposed to excessive

heat such as sunshine or ﬁre.

REMOTE SENSOR INSTALLATION

1. Slide open the battery door.

2. Slide channel switch to channel 1.

3. Select EU/UK. (RTHN318D only)

4. Insert the battery, matching the polarities (+ / -).

5. Press

RESET after each battery change.

6. Close the battery door.

7. Press and hold

SEARCH on main unit to initiate

search and start receiving time and temperature

data from the sensor.

The sensor reception icon shows the status:

ICONS MEANING

Main unit is searching

for sensor(s)

A sensor channel

has been found and

logged on

No sensor found

NOTE After every sensor initialisation, the main unit

may take up to 30 minutes to receive the time from

the sensor.

8. Secure the sensor in the desired location using the

wall mount hole or double sided adhesive tape.

BAR339DP_M_EN_R6.indd 4 6/18/08 12:30:50 PM